[Users] changing CarpetRegrid2 parameters for ETK Maxwell + mercurial Carpet?

Kelly, Bernard J. (GSFC-660.0)[UNIVERSITY OF MARYLAND BALTIMORE COUNTY] bernard.j.kelly at nasa.gov
Thu Mar 1 14:53:27 CST 2012


Hi again. I didn't hear any more about this, but if anyone tried the
download link now, they'd find it's expired.

I've rehosted the output on WebDrive. New URL:

https://webdrive.gsfc.nasa.gov/longauth/600/bernard.j.kelly/ipaNYYC

... same old username/password: beanykelly/helpmercurial
[This should be good for 30 days.]


Thanks,

Bernard




On 2/16/12 4:47 PM, "Kelly, Bernard J. (GSFC-660.0)[UNIVERSITY OF MARYLAND
BALTIMORE COUNTY]" <bernard.j.kelly at nasa.gov> wrote:

>Hi Erik.
>
>OK, I reran again, with veryverbose and CarpetLib::output_bboxes=yes. Much
>larger output -- about 3GB in toto, Tarred + Zipped to about 271MB, is now
>on WebDrive:
>
>https://webdrive.gsfc.nasa.gov/shortauth/bernard.j.kelly/sf5eCoC
>
>
>Again, the username/password = beanykelly/helpmercurial.
>
>Thanks,
>
>Bernard
>
>
>
>On 2/15/12 11:18 PM, "Erik Schnetter" <schnetter at cct.lsu.edu> wrote:
>
>>Bernard
>>
>>Thanks for the data.
>>
>>My preliminary analysis shows that there is a small box, 1 grid point
>>wide in the y direction, located near the centre of the domain and
>>somewhat near the lower z (symmetry) boundary, where Carpet cannot
>>find a source to synchronise ghost or buffer zones. The problem is not
>>at the symmetry boundary, and the region does not seem to have a
>>regular extent.
>>
>>It seems that the ghost zones on level 10 are to be filled by buffer
>>zones on level 9, which is not allowed. This would be an error in
>>CarpetRegrid2, which needs to ensure proper nesting, or an error in
>>Carpet if it determines the location of buffer zones incorrectly.
>>
>>Can you re-run with CarpetRegrid2::veryverbose=yes?
>>
>>The output of CarpetLib::output_bboxes=yes would also be helpful, but
>>may be too large, unless you manage to restart from a checkpoint just
>>before this problem occurs.
>>
>>-erik
>>
>>
>>-- 
>>Erik Schnetter <schnetter at cct.lsu.edu>
>>http://www.cct.lsu.edu/~eschnett/
>
>_______________________________________________
>Users mailing list
>Users at einsteintoolkit.org
>http://lists.einsteintoolkit.org/mailman/listinfo/users



More information about the Users mailing list