[Users] NSNSTOHMNS(Gallery example) Plotting issues

[Roland Haas]

Hello Atul,

as far as I can tell VisIt 3.1.0 binary available from the VisIt
downloads page
(https://wci.llnl.gov/simulation/computer-codes/visit/executables) for
Linux (Debian 9.0 64bit specifically) does have the plugin included.

To check you should see if there are files 

visit3_1_0.linux-x86_64/3.1.0/linux-x86_64/plugins/databases/libECarpetHDF5Database_ser.so

visit3_1_0.linux-x86_64/3.1.0/linux-x86_64/plugins/databases/libECarpetHDF5Database_par.so

visit3_1_0.linux-x86_64/3.1.0/linux-x86_64/plugins/databases/libICarpetHDF5Database.so

visit3_1_0.linux-x86_64/3.1.0/linux-x86_64/plugins/databases/libMCarpetHDF5Database.so

which are the compiled shared libraries (not the src files). I can
confirm that that plugin can read in CarpetHDF5 files (did so today).

This is for VisIt 3.1.0 git version 134a7fd (according to the about
dialog).

I would check that you have not disabled the CarpetHDF5 database
plugin in the "Options/Plugin Manager" menu. 

Other than that I am not sure at all what could be happening. I have
seem issues with HDF5 files being of too new a format (eg if ldd
cactus_sim reports libhdf5.so.10 but "ls
visit3_1_0.linux-x86_64/3.1.0/linux-x86_64/lib/libhdf5.so.*" is less than 10) but that does not (as far as I know) affect Cactus since
we ask the newer libraries to write files readable by the old versions.

Just for completeness' sake I am attaching a screenshot showing where
CarpetHDF5 shows up for me.

Yours,
Roland

> Hi Roland,
> 
> Thanks again for your email.
> 
> > > I have VisIt 3 and ETK Mayer downloaded which I believe doesn't have
> > > CarpetHDF5. How do I use the CarpetHDF5 reader? Do I need to install it
> > > from https://bitbucket.org/rhaas80/carpethdf5/src/multifile/ or is  
> > there a  
> > > newer version?  
> > That is still the newest version. Though I do not know of that version
> > will compile with VisIt 3 (it may have changed the plugin interfaces).
> >
> > I had a look at VisIt 3.1
> > (
> > https://github.com/visit-dav/visit/releases/download/v3.1.0/visit3_1_0.linux-x86_64-debian9.tar.gz
> > since I run Debian) and as far as I can tell that one includes the
> > CarpetHDF5 reader in
> >
> > visit3_1_0.linux-x86_64/3.1.0/linux-x86_64/plugins/databases/libMCarpetHDF5Database.so  
> 
> 
> I installed VisIt 3.1.0 from the link. I tried running the visualization
> script with it and that gives me errors. The issue still seems to be about
> reading Carpet HDF5 files.
> 
> 
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> VisIt: Error - VisIt could not read from the file "/afs/
> crc.nd.edu/user/a/akedia/simulations/nsnstohmns_in_saeng/output-0000/nsnstohmns/rho.xy.h5
> ".
> 
> The generated error message was:
> 
> There was an error opening /afs/
> crc.nd.edu/user/a/akedia/simulations/nsnstohmns_in_saeng/output-0000/nsnstohmns/rho.xy.h5.
> It may be an invalid file.
> VisIt tried using the following file format readers to open the file: <No
> suitable plugins were identified>
> VisIt: Error - Cannot create a plot until a database has been opened.
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> 
> 
> For assurance, I checked that the installed version of VisIt 3.1.0 has a
> folder on CarpetHDF5 in :
> visit/3.1.0/visit3.1.0/src/databases/CarpetHDF5
> Should this be the only folder with CarpetHDF5 created?
> 
> > As to s.screenCapture, it was by default set to 0 , I have attached a  
> > > sample image.
> > > setting s.screenCapture = 1 gives empty images, so does not fix the  
> > problem.
> > I see. The first step will then be to try and see if you can load a
> > Carpet HDF5 file in the GUI to make sure that at least in principle you
> > should be able to load a file (as compared to there being a scripting
> > issue).
> >
> > You should also make sure that when the script runs the file is
> > actually opened by CarpetHDF5 and not some other plugin that can read
> > HDF5 files (PIXIE is often doing this). I believe there is some output
> > to screen about which reader is used.
> >  
> 
> On trying to load a file on Visit GUI I get this error message:
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> VisIt could not read from the file "/afs/
> crc.nd.edu/user/a/akedia/simulations/nsnstohmns_in_saeng/output-0000/nsnstohmns/rho.xy.h5
> ".
> 
> The generated error message was:
> 
> There was an error opening /afs/
> crc.nd.edu/user/a/akedia/simulations/nsnstohmns_in_saeng/output-0000/nsnstohmns/rho.xy.h5.
> It may be an invalid file.
> VisIt tried using the following file format readers to open the file: <No
> suitable plugins were identified>
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> And when I'm selecting the file, there is no option for CarpetHDF5 in the
> dropdown list of supported file name/extension.
> 
> Thank you for your help,
> Atul



-- 
My email is as private as my paper mail. I therefore support encrypting
and signing email messages. Get my PGP key from http://pgp.mit.edu .
-------------- next part --------------
A non-text attachment was scrubbed...
Name: snap.jpg
Type: image/jpeg
Size: 81770 bytes
Desc: not available
Url : http://lists.einsteintoolkit.org/pipermail/users/attachments/20200203/fdd0c8f0/attachment-0001.jpg 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
Url : http://lists.einsteintoolkit.org/pipermail/users/attachments/20200203/fdd0c8f0/attachment-0001.bin