Hello Roland, 
I did run the parameter file you gave on my local machine and kraken and both simulations fail at exactly the same time step ( t = 52.320 ) due to the following error: 
 WARNING level 1 in thorn GRHydro processor 0 host bns
  (line 2004 of GRHydro_Con2Prim.F90): 
  -> Con2Prim failed; stopping the code.
WARNING level 1 in thorn GRHydro processor 0 host bns
  (line 2005 of GRHydro_Con2Prim.F90): 
  -> Even with mesh refinement, this point is not restricted from a finer level, so this is really an error

WARNING level 1 in thorn GRHydro processor 0 host bns
  (line 2007 of GRHydro_Con2Prim.F90): 
  ->         on carpet reflevel:  4
WARNING level 1 in thorn GRHydro processor 0 host bns
  (line 2010 of GRHydro_Con2Prim.F90): 
  ->       xyz location:     3.400000        2.800000        2.400000
WARNING level 1 in thorn GRHydro processor 0 host bns
  (line 2012 of GRHydro_Con2Prim.F90): 
  ->             radius:     5.015974
WARNING level 0 in thorn GRHydro processor 0 host bns
  (line 2015 of GRHydro_Con2Prim.F90): 
  ->         velocities:              NaN             NaN             NaN
WARNING level 0 in thorn GRHydro processor 0 host bns
  (line 2015 of GRHydro_Con2Prim.F90): 
  ->         velocities:              NaN             NaN             NaN

Any suggestions? 
Thank you. 
On Thu, Oct 18, 2012 at 1:20 PM, <users-request@einsteintoolkit.org> wrote:
Send Users mailing list submissions to
        users@einsteintoolkit.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.einsteintoolkit.org/mailman/listinfo/users
or, via email, send a message with subject or body 'help' to
        users-request@einsteintoolkit.org

You can reach the person managing the list at
        users-owner@einsteintoolkit.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Users digest..."


Today's Topics:

   1. Re: tov collapse (Roland Haas)


----------------------------------------------------------------------

Message: 1
Date: Thu, 18 Oct 2012 10:20:19 -0700
From: Roland Haas <roland.haas@physics.gatech.edu>
Subject: Re: [Users] tov collapse
To: users@einsteintoolkit.org
Message-ID: <50803A53.5040009@mail.gatech.edu>
Content-Type: text/plain; charset="iso-8859-1"

Hello Peter,

> I'd like to test TOV collapse and I'm using the parameter file from  the ET
> paper 2011 (tov_collapse_vc_l3.par).  There are couple of thorns missing
> like Corecollapsecontrol and CartesianCoordinates? Could you please provide
> this thorns? Also I was wondering if that parameter file will work with
> ET_2012_05 release since this parameter file was tested on previous version?
The missing thorn is CoreCollapseControl (if it still complains about
Coordinates then please just remove the thorn, it is not actually used).
The thorn is Christian Ott's helper thorn to control grid setup etc
during a core collapse. Christian has already said that he is fine with
making the thorn public, it would however require some cleanup.

Since you are not the first to try this parfile and fail (and since I am
the person responsible for publishing the parfile), would you mind
giving the attached one a try please? It replaces CoreCollapseControl
with AEIThorns/Trigger.

I also attach a an amended thorn list to pull in the thorn. Steps are:

cd Cactus
bin/GetComponents -a --root . --thornlist einsteintoolkitAndTrigger.th
simfactory/bin/sim build --reconfig --thornlist einsteintoolkitAndTrigger.th

Please see the recent thread with Chris Evans
http://lists.einsteintoolkit.org/pipermail/users/2012-October/002591.html on
this mailing list as well (and Vasilios Mewes
http://lists.einsteintoolkit.org/pipermail/users/2012-July/002364.html
some time ago).

Please note that the parfile apparently leads to GRHydro NaN errors
eventually (it always did but only after black hole formation, I am not
sure when it happens right now).

I theory the parameter file should work with newer versions. I am trying
it right now with the Lovelace release (2012_05) and will get back to
you (and Chris) once I am done. Feel free to give it at try as well though.

Yours,
Roland

--
My email is as private as my paper mail. I therefore support encrypting
and signing email messages. Get my PGP key from http://keys.gnupg.net.
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: tov_collapse_vc_l3.par
Url: http://lists.einsteintoolkit.org/pipermail/users/attachments/20121018/92571b61/attachment.pl
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: einsteintoolkitAndTrigger.th
Url: http://lists.einsteintoolkit.org/pipermail/users/attachments/20121018/92571b61/attachment-0001.pl
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
Url : http://lists.einsteintoolkit.org/pipermail/users/attachments/20121018/92571b61/attachment.bin

------------------------------

_______________________________________________
Users mailing list
Users@einsteintoolkit.org
http://lists.einsteintoolkit.org/mailman/listinfo/users


End of Users Digest, Vol 31, Issue 20
*************************************



--
Petr Tsatsin
Graduate Student - Department of Physics
Charles E. Schmidt College of Science
Florida Atlantic University
(561)-297-3386
cell: 561-692-2040
ptsatin@fau.edu, ptsatsin@gmail.com