[Commits] [svn:einsteintoolkit] Paper_EinsteinToolkit_2010/ (Rev. 280)
schnetter at cct.lsu.edu
schnetter at cct.lsu.edu
Mon Mar 12 10:06:42 CDT 2012
User: eschnett
Date: 2012/03/12 10:06 AM
Modified:
/
ET.tex
/figures/
rot180-grid.fig, rot180-grid.pdf
Log:
Improve figure 8
File Changes:
Directory: /
============
File [modified]: ET.tex
Delta lines: +20 -15
===================================================================
--- ET.tex 2012-03-12 14:59:58 UTC (rev 279)
+++ ET.tex 2012-03-12 15:06:41 UTC (rev 280)
@@ -2377,22 +2377,27 @@
the moving objects.
\begin{figure}[htbp]
\begin{center}
- \includegraphics[width=0.3\textwidth]{rot180-grid}
+ \includegraphics[width=0.4\textwidth]{rot180-grid}
\end{center}
- \caption{Grid layout created by \codename{CarpetRegrid2}. In this
- example we use one ghost point, one boundary point, and two buffer
- points
- \todo{ES: this is the first (and only) mention of ``buffer points''}
- as well as \codename{RotatingSymmetry180}. There are two refinement
- levels present, a coarse one represented by big red circles and a
- fine one represented by small black circles. The
- filled black circle is the single point specified by the user.
- \codename{CarpetRegrid2} surrounded it with a layer of buffer
- points, indicated by the cyan filled circles. The open circles are
- ghost and boundary points which are maintained by \codename{Carpet}.
- The presence of the $\pi$-symmetry forces \codename{CarpetRegrid2}
- to create the tiny region to the bottom left of the grid. It serves
- only as a source for the boundary condition.}
+ % ES: This discussion also mentioned buffer points, but was the
+ % only place we mention buffer points. Also, the discussion below
+ % is quite complex even without buffer points, so I don't mention
+ % them any more. (This is technically correct, because the
+ % algorithm described below doesn't know about buffer points --
+ % these are handled before and afterwards.)
+ \caption{Example of a grid layout created by
+ \codename{CarpetRegrid2}. In this example we use one boundary
+ point and one ghost point, as well as
+ \codename{RotatingSymmetry180}. This figure shows two refinement
+ levels, a coarse (big red circles) and a fine one (small black
+ circles). Starting from a user-specified refined region
+ consisting of $5\times3$ points (small, dark, filled circles in
+ the upper half), \codename{CarpetRegrid2} enforced the the
+ $\pi$-symmetry by adding the $2\times3$ block of refined points
+ in the lower half (small, light, filled circles). The open
+ circles are boundary and ghost points maintained by
+ \codename{Carpet}. The arrow demonstrates how the $\pi$-symmetry
+ fills in a boundary point.}
\label{fig:rot180-grid}
\end{figure}
Directory: /figures/
====================
File [modified]: rot180-grid.fig
Delta lines: +24 -24
===================================================================
--- figures/rot180-grid.fig 2012-03-12 14:59:58 UTC (rev 279)
+++ figures/rot180-grid.fig 2012-03-12 15:06:41 UTC (rev 280)
@@ -8,24 +8,18 @@
-2
1200 2
1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 7200 7200 335 335 7200 7200 7350 7500
-1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 7200 335 335 4800 7200 4950 7500
-1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 7200 2400 335 335 7200 2400 7350 2700
-1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 2400 335 335 4800 2400 4950 2700
1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 7200 4800 335 335 7200 4800 7350 5100
1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 4800 335 335 4800 4800 4950 5100
1 3 0 4 4 7 50 -1 20 0.000 1 0.0000 2400 7200 335 335 2400 7200 2550 7500
1 3 0 4 4 7 50 -1 20 0.000 1 0.0000 2400 2400 335 335 2400 2400 2550 2700
1 3 0 4 4 7 50 -1 20 0.000 1 0.0000 2400 4800 335 335 2400 4800 2550 5100
1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 9600 7200 335 335 9600 7200 9750 7500
-1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 9600 2400 335 335 9600 2400 9750 2700
1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 9600 4800 335 335 9600 4800 9750 5100
1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 12000 7200 335 335 12000 7200 12150 7500
1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 12000 2400 335 335 12000 2400 12150 2700
1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 12000 4800 335 335 12000 4800 12150 5100
1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 7200 0 335 335 7200 0 7350 300
-1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 0 335 335 4800 0 4950 300
1 3 0 4 4 7 50 -1 20 0.000 1 0.0000 2400 0 335 335 2400 0 2550 300
-1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 9600 0 335 335 9600 0 9750 300
1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 12000 0 335 335 12000 0 12150 300
1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 7200 9600 335 335 7200 9600 7350 9900
1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 9600 335 335 4800 9600 4950 9900
@@ -38,12 +32,11 @@
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 3600 2400 150 150 3600 2400 3600 2550
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 10800 3600 150 150 10800 3600 10800 3750
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 10800 2400 150 150 10800 2400 10800 2550
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 8400 2400 150 150 8400 2400 8400 2550
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 9600 2400 150 150 9600 2400 9600 2550
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 2400 150 150 4800 2400 4800 2550
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 2400 150 150 6000 2400 6000 2550
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 7200 2400 150 150 7200 2400 7200 2550
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 7200 150 150 4800 7200 4800 7350
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 8400 2400 150 150 8400 2400 8550 2400
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 9600 2400 150 150 9600 2400 9750 2400
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 4800 2400 150 150 4800 2400 4950 2400
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 6000 2400 150 150 6000 2400 6150 2400
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 7200 2400 150 150 7200 2400 7350 2400
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 4800 6000 150 150 4800 6000 4800 6150
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 4800 3600 150 150 4800 3600 4800 3750
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 6000 3600 150 150 6000 3600 6000 3750
@@ -54,19 +47,18 @@
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 3600 0 150 150 3600 0 3600 150
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 10800 1200 150 150 10800 1200 10800 1350
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 10800 0 150 150 10800 0 10800 150
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 8400 0 150 150 8400 0 8400 150
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 9600 0 150 150 9600 0 9600 150
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 9600 1200 150 150 9600 1200 9600 1350
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 8400 1200 150 150 8400 1200 8400 1350
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 7200 1200 150 150 7200 1200 7200 1350
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 1200 150 150 6000 1200 6000 1350
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 1200 150 150 4800 1200 4800 1350
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 8400 0 150 150 8400 0 8550 0
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 9600 0 150 150 9600 0 9750 0
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 9600 1200 150 150 9600 1200 9750 1200
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 8400 1200 150 150 8400 1200 8550 1200
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 7200 1200 150 150 7200 1200 7350 1200
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 6000 1200 150 150 6000 1200 6150 1200
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 4800 1200 150 150 4800 1200 4950 1200
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 3600 9600 150 150 3600 9600 3600 9750
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 3600 8400 150 150 3600 8400 3600 8550
1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 8400 150 150 4800 8400 4800 8550
1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 9600 150 150 4800 9600 4800 9750
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 0 150 150 4800 0 4800 150
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 0 150 150 6000 0 6000 150
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 6000 0 150 150 6000 0 6150 0
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 7200 6000 150 150 7200 6000 7200 6150
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 7200 7200 150 150 7200 7200 7200 7350
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 7200 8400 150 150 7200 8400 7200 8550
@@ -74,8 +66,16 @@
1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 6000 6000 150 150 6000 6000 6000 6150
1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 9600 150 150 6000 9600 6150 9600
1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 8400 150 150 6000 8400 6000 8550
-1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 7200 150 150 6000 7200 6000 7350
1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 7200 0 150 150 7200 0 7200 150
+1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 4800 0 150 150 4800 0 4950 0
+1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 0 335 335 4800 0 4950 300
+1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 9600 0 335 335 9600 0 9750 300
+1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 2400 335 335 4800 2400 4950 2700
+1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 7200 2400 335 335 7200 2400 7350 2700
+1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 9600 2400 335 335 9600 2400 9750 2700
+1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 7200 150 150 6000 7200 6150 7200
+1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 7200 335 335 4800 7200 4950 7500
+1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 7200 150 150 4800 7200 4800 7350
2 1 1 4 0 16 51 -1 -1 10.000 0 0 -1 1 0 2
1 1 1.00 60.00 120.00
2400 4800 12000 4800
@@ -92,5 +92,5 @@
2 0 4.00 180.00 480.00
6000 9600 2400 4800 3600 0
0.000 1.000 0.000
-4 1 0 49 -1 0 48 0.0000 4 735 1650 450 5700 y = 0\001
-4 1 0 49 -1 0 48 0.0000 4 570 1650 4800 12150 x = 0\001
+4 1 0 49 -1 0 48 0.0000 4 735 1635 450 5700 y = 0\001
+4 1 0 49 -1 0 48 0.0000 4 555 1635 4800 12150 x = 0\001
File [modified]: rot180-grid.pdf
Delta lines: +0 -0
===================================================================
(Binary files differ)
More information about the Commits
mailing list