[Users] ETK in NERSC machines (Hopper/Carver) does not work properly

Erik Schnetter schnetter at cct.lsu.edu
Sat Mar 10 06:05:10 CST 2012


Jose

This is worrysome.

Can you check out the Einstein Toolkit on another machine, e.g. your
local laptop or workstation? If so, you are fine; you can then use
Simfactory to copy your source tree via "sim sync hopper". (In fact,
this is how I work -- I have only a single "real" checkout on my
laptop, and I then copy this source tree to all other machines.)

-erik

On Fri, Mar 9, 2012 at 7:41 PM, Jose Fiestas Iquira <jafiestas at lbl.gov> wrote:
> Dear colleagues,
>
> I was trying the last days to install an own application based on ETK in
> NERSC machines (Hopper/Carver), having some problems during the compilation.
> Before trying to find the real problem, I started from scratch and realize I
> can not even checkout ETK properly.
> Does somebody tried it in machines different as LONI machines since the last
> release? Would appreciate any experience about it.
> Below my steps:
>
>
> 1. GetComponents <Einstein Toolkit>  (release version)
> curl -O https://raw.github.com/gridaphobe/CRL/master/GetComponents
> ..............................
> 183 components checked out.
>   0 components updated.
>
>   Unable to process simfactory2
>   Unable to process LSUThorns/QuasiLocalMeasures
>   Unable to process LSUThorns/SummationByParts
>   Unable to process LSUThorns/Vectors
>
> Summary of Warnings:
>
> Could not checkout module simfactory2
>
>
> Could not checkout module LSUThorns/QuasiLocalMeasures
>
>
> Could not checkout module LSUThorns/SummationByParts
>
>
> Could not checkout module LSUThorns/Vectors
>
>
>   Time Elapsed: 26 minutes, 19 seconds
> ..............................................
>
> 2. GetComponent  <WaveDemo>
> ./GetComponents
> http://cactuscode.org/documentation/tutorials/wavetoydemo/WaveDemo.th
>
> Went OK
>
> 3.  cd Cactus
> gmake WaveDemo-config
> gmake WaveDemo
>
>
> ------------------------------------------------------
> Warnings were generated during execution of the CST
> ------------------------------------------------------
>
>
> CST error 1:
>   -> Duplicate thornname LocalReduce in CactusBase and CactusNumerical
>
>
> CST error 2:
>   -> Thorn 'CarpetLib' requires the capability 'Vectors'.
>      Please add a thorn that provides 'Vectors' to your ThornList or remove
> 'CarpetLib' from it !
>
>
> CST error 3:
>   -> Thorn 'ML_BSSN' requires the capability 'Vectors'.
>      Please add a thorn that provides 'Vectors' to your ThornList or remove
> 'ML_BSSN' from it !
>
>
> CST error 4:
>   -> Thorn 'ML_BSSN_O2' requires the capability 'Vectors'.
>      Please add a thorn that provides 'Vectors' to your ThornList or remove
> 'ML_BSSN_O2' from it !
>
>
> CST error 5:
>   -> ID_BIN_BH (thorn Meudon_Bin_BH) inherits from SummationByParts
>      No thorn in your current ThornList implements SummationByParts
>      Either remove Meudon_Bin_BH, or add a thorn to your
>       ThornList implementing SummationByParts
>      Available thorns in arrangements directory implementing
> SummationByParts:
>         LSUThorns/SummationByParts
>
>
> CST error 6:
>   -> MEUDON_BIN_NS (thorn Meudon_Bin_NS) inherits from SummationByParts
>      No thorn in your current ThornList implements SummationByParts
>      Either remove Meudon_Bin_NS, or add a thorn to your
>       ThornList implementing SummationByParts
>      Available thorns in arrangements directory implementing
> SummationByParts:
>         LSUThorns/SummationByParts
>
>
> CST error 7:
>   -> Configuration script for thorn BLAS returned exit code 1
>      Error message: 'Error while building BLAS. Aborting.'
>
>
> CST error 8:
>   -> Configuration script for thorn LAPACK returned exit code 1
>      Error message: 'Error while building LAPACK. Aborting.'
>
> ------------------------------------------------------
>
> gmake[1]: ***
> [/project/projectdirs/snfactry/hshukla/CACTUS/Cactus/configs/WaveDemo/config-data/make.thornlist]
> Error 1
> gmake: *** [WaveDemo] Error 2
>
>
> 4.  Copied LSUThorns by hand and repeated step 3 and got the same errors.
>
> 183 components checked out.
>   0 components updated.
>
>   Unable to process simfactory2
>   Unable to process LSUThorns/QuasiLocalMeasures
>   Unable to process LSUThorns/SummationByParts
>   Unable to process LSUThorns/Vectors
>
> Summary of Warnings:
>
> Could not checkout module simfactory2
>
>
> Could not checkout module LSUThorns/QuasiLocalMeasures
>
>
> Could not checkout module LSUThorns/SummationByParts
>
>
> Could not checkout module LSUThorns/Vectors
>
>
>   Time Elapsed: 26 minutes, 19 seconds
>
> Best,
> Jose
>
> _______________________________________________
> Users mailing list
> Users at einsteintoolkit.org
> http://lists.einsteintoolkit.org/mailman/listinfo/users
>



-- 
Erik Schnetter <schnetter at cct.lsu.edu>
http://www.perimeterinstitute.ca/personal/eschnetter/


More information about the Users mailing list