[Users] ETK in Carver

[Erik Schnetter]

On Wed, Feb 22, 2012 at 9:28 PM, Jose Fiestas Iquira <jafiestas at lbl.gov> wrote:
> Hi,
>
> I tried to install ETK in Hopper. Get a simple error after
> 'simfactory/bin/sim build':
>
> Using configuration: sim
> Building sim
> /bin/bash: module: command not found

I don't know where the "module" command is used, or why it does not
work for you.

> Also tried in bash modus but did not help
>
> Have a question. Following two commands have the same effect?

No, these commands are different. GetComponents checks out many
repositories, probably including the one you list below.

-erik

> ./GetComponents -a
> http://svn.einsteintoolkit.org/manifest/branches/ET_2011_10/einsteintoolkit.th
>
> svn co https://svn.cct.lsu.edu/repos/numrel/simfactory/branches/PYSIM_2010
> simfactory
>
>
> Thanks,
> Jose
>
>
> On Wed, Feb 22, 2012 at 5:38 PM, Jose Fiestas Iquira <jafiestas at lbl.gov>
> wrote:
>>
>> It was like these:
>> ....
>> COMPILING
>> /global/u1/f/fiestas/CACTUS/Cactus/arrangements/Carpet/LoopControl/src/loopcontrol.c
>> PGC-W-0155-parallel for loop variable must be local k
>> (/global/u1/f/fiestas/CACTUS/Cactus/configs/sim/build/LoopControl/loopcontrol.c:
>> 1080)
>> PGC-S-0094-Illegal type conversion required
>> (/global/u1/f/fiestas/CACTUS/Cactus/configs/sim/build/LoopControl/loopcontrol.c:
>> 1080)
>> PGC-S-0094-Illegal type conversion required
>> (/global/u1/f/fiestas/CACTUS/Cactus/configs/sim/build/LoopControl/loopcontrol.c:
>> 1080)
>> PGC/x86-64 Linux 9.0-3: compilation completed with severe errors
>> make[3]: *** [loopcontrol.c.o] Error 2
>> make[2]: *** [make.checked] Error 2
>> make[1]: ***
>> [/global/u1/f/fiestas/CACTUS/Cactus/configs/sim/lib/libthorn_LoopControl.a]
>> Error 2
>> make[1]: *** Waiting for unfinished jobs....
>> .....
>> COMPILING
>> /global/u1/f/fiestas/CACTUS/Cactus/arrangements/EinsteinInitialData/IDAxiBrillBH/src/ParamCheck.c
>> Creating
>> /global/u1/f/fiestas/CACTUS/Cactus/configs/sim/lib/libthorn_IDAnalyticBH.a
>> Creating
>> /global/u1/f/fiestas/CACTUS/Cactus/configs/sim/lib/libthorn_IDAxiBrillBH.a
>> Creating
>> /global/u1/f/fiestas/CACTUS/Cactus/configs/sim/lib/libthorn_IDAxiOddBrillBH.a
>> make: *** [sim] Error 2
>>
>> I am trying hopper now. Let see.
>> Jose
>>
>>
>> On Wed, Feb 22, 2012 at 5:34 PM, Erik Schnetter <schnetter at cct.lsu.edu>
>> wrote:
>>>
>>> I'm not that far yet. What messages did you get before these errors?
>>> Those errors only say that there was an error.
>>>
>>> -erik
>>>
>>> On Wed, Feb 22, 2012 at 8:32 PM, Jose Fiestas Iquira <jafiestas at lbl.gov>
>>> wrote:
>>> > Hi Erik,
>>> > I also did and could not finish it with these errors:
>>> >
>>> > make[3]: *** [loopcontrol.c.o] Error 2
>>> > make[2]: *** [make.checked] Error 2
>>> > make[1]: ***
>>> >
>>> > [/global/u1/f/fiestas/CACTUS/Cactus/configs/sim/lib/libthorn_LoopControl.a]
>>> > Error 2
>>> > make[1]: *** Waiting for unfinished jobs....
>>> >
>>> >
>>> > Did you get the same ?
>>> >
>>> > Thanks,
>>> > Jose
>>> >
>>> > On Wed, Feb 22, 2012 at 5:21 PM, Erik Schnetter <schnetter at cct.lsu.edu>
>>> > wrote:
>>> >>
>>> >> Jose
>>> >>
>>> >> I used to build and run on Carver, but stopped using this machine
>>> >> quite some time ago. Simfactory still contains configuration options,
>>> >> but these may now be outdated (if Carver's software was updated
>>> >> since). Yes, this is Carver at NERSC.
>>> >>
>>> >> You would use these files with Simfactory. You would essentially
>>> >> follow the instructions on
>>> >> <https://docs.einsteintoolkit.org/et-docs/Tutorial_for_New_Users>, but
>>> >> would use Carver instead of Queen Bee. (Account, access, allocation
>>> >> etc. would obviously be different.) Simfactory should automatically
>>> >> detect that it is running on Carver, and should use the right options.
>>> >>
>>> >> Comparing Hopper's and Carver's options may give you hints what to
>>> >> change. Hopper's information in Simfactory is up to date.
>>> >>
>>> >> I've just started a build on Carver, I'll let you know what happens.
>>> >>
>>> >> -erik
>>> >>
>>> >> On Wed, Feb 22, 2012 at 8:10 PM, Jose Fiestas Iquira
>>> >> <jafiestas at lbl.gov>
>>> >> wrote:
>>> >> > Dear Colleagues,
>>> >> >
>>> >> > I am trying to install ETK in Carver at NERSC. By chance I found
>>> >> > this
>>> >> > link
>>> >> >
>>> >> > http://mail.cct.lsu.edu/pipermail/simfactory/2010-September/000306.html
>>> >> > I want to be sure it is the same machine. I am updating
>>> >> > ./Getcomponents
>>> >> > -a
>>> >> > ... right now
>>> >> >
>>> >> > Do somebody have experience with this machine? I found a carver.ini
>>> >> > in
>>> >> > simfactory/mbd/machines
>>> >> >
>>> >> > How can I use this .ini while doing
>>> >> > simfactory/bin.sim build
>>> >> > to create the .exe ?
>>> >> >
>>> >> > Thanks,
>>> >> > Jose
>>> >> >
>>> >> >
>>> >> > _______________________________________________
>>> >> > Users mailing list
>>> >> > Users at einsteintoolkit.org
>>> >> > http://lists.einsteintoolkit.org/mailman/listinfo/users
>>> >> >
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> Erik Schnetter <schnetter at cct.lsu.edu>
>>> >> http://www.cct.lsu.edu/~eschnett/
>>> >
>>> >
>>>
>>>
>>>
>>> --
>>> Erik Schnetter <schnetter at cct.lsu.edu>
>>> http://www.cct.lsu.edu/~eschnett/
>>
>>
>



-- 
Erik Schnetter <schnetter at cct.lsu.edu>
http://www.perimeterinstitute.ca/personal/eschnetter/