[Users] Problem with reproducing the NsNsToHMNS
hassan.khalvati at physics.sharif.edu
hassan.khalvati at physics.sharif.edu
Thu Oct 25 08:52:22 CDT 2018
Hello All,
The simulation is running for about 23 hours, and the warning below is
showing up repeatedly. Is it normal ?
I saw in archived emails about CarpetRegrid2 Warnings, that Erik mentioned
that :
"Carpet attempts to do so ten times, then gives up assuming there is an
internal inconsistency"
But here it is still processing. and the warning had shown up for about a
hundred times!
WARNING level 1 from host compute-0-46.local process 0
while executing schedule bin (none), routine (no thorn)::(no routine)
in thorn CarpetRegrid2, file
/home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/CarpetRegrid2/regrid.cc:390:
-> Could not enforce grid structure properties in this round, starting
another round
INFO (CarpetRegrid2): Enforcing grid structure properties, iteration 2
WARNING level 1 from host compute-0-46.local process 0
while executing schedule bin (none), routine (no thorn)::(no routine)
in thorn CarpetRegrid2, file
/home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/CarpetRegrid2/regrid.cc:390:
-> Could not enforce grid structure properties in this round, starting
another round
WARNING level 1 from host compute-0-46.local process 1
while executing schedule bin (none), routine (no thorn)::(no routine)
in thorn CarpetRegrid2, file
/home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/CarpetRegrid2/regrid.cc:390:
-> Could not enforce grid structure properties in this round, starting
another round
---------------------------
Hassan Khalvati
Master Student
Department of Physics
Sharif University of Technology
Tehran, Azadi
Hassan.khalvati at physics.sharif.edu
> Dear Roland
> Thank you for your prompt response.
> The simulation is still going on and there is no level 0 warning.
>
>
>
>
>
>
>
>
>
>
>
>
>> Hello Hassan,
>>
>> all warnings that are level 1 and higher can be ignored (high level
>> means a lower priority warning).
>>
>> Only level 0 are actually errors. Level 2 and higher are usually "stuff
>> that we'd want to let you know but that will not cause any averse
>> effects", such as the " No HDF5 checkpoint files with basefilename
>> 'checkpoint.chkpt' found" that is output for the first segment of a
>> simulation.
>>
>> The one "Could not register parameter change monitor for
>> 'signal_numbers'" is a bit more puzzling since this should not happen
>> (it
>> is perfectly harmless though).
>>
>> Does your simulation actually proceed or does it abort with a level 0
>> warning or similar issue?
>>
>> Yours,
>> Roland
>>
>>> Dear all,
>>>
>>> I need some guidance on reproducing the NsNsToHMNS which is provided in
>>> the gallery section of ET's website.
>>> but there are a bunch of warnings during the simulation.
>>>
>>> I would be grateful if anyone could possibly tell me what is the
>>> minimum
>>> limit on core numbers for the NsNs and also check the warnings below.
>>>
>>> I tried with 4 procs at first , but now I am trying on 28 procs. but
>>> there are same warnings.
>>> I don't know if I have to take them serious or not !
>>> Because even with these warnings, the simulation is still running...
>>>
>>>
>>> Gratefully,
>>> Hassan
>>>
>>>
>>>
>>>
>>> *****Here are all warnings***** :
>>>
>>>
>>> Warning: thorn CoordBase already scheduled for activation
>>>
>>>
>>>
>>> WARNING level 3 from host compute-0-46.local process 0
>>> while executing schedule bin (none), routine (no thorn)::(no routine)
>>> in thorn IOUtil, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/IOUtil/CheckpointRecovery.cc:730:
>>> -> No HDF5 checkpoint files with basefilename 'checkpoint.chkpt'
>>> found
>>> in recovery directory 'NsNs'
>>>
>>>
>>>
>>>
>>>
>>>
>>> Formaline::Formaline_RegisterWarnings: [meta] Register to receive
>>> warnings
>>> and info messages from the flesh
>>>
>>>
>>>
>>>
>>>
>>> WARNING level 3 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_STARTUP, routine
>>> TerminationTrigger::TerminationTrigger_StartSignalHandler
>>> in thorn TerminationTrigger, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/TerminationTrigger/signal.c:64:
>>> -> Could not register parameter change monitor for 'signal_numbers'
>>> INFO (Vectors): Using vector size 2 for architecture SSE2 (64-bit
>>> precision)
>>>
>>>
>>>
>>>
>>>
>>>
>>> INFO (Formaline): Writing tarballs with the Cactus sources into the
>>> directory "NsNs/cactus-source"
>>> WARNING level 1 from host compute-0-46.local process 1
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:15:
>>> -> Forcing ML_BSSN::initial_boundary_condition="extrapolate-gammas"
>>> because ML_BSSN::my_initial_boundary_condition="extrapolate-gammas"
>>> WARNING level 1 from host compute-0-46.local process 1
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:28:
>>> -> Forcing ML_BSSN::rhs_boundary_condition="NewRad" because
>>> ML_BSSN::my_rhs_boundary_condition="NewRad"
>>> WARNING level 1 from host compute-0-46.local process 1
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:47:
>>> -> Forcing ML_BSSN::epsDiss=0.0 because
>>> ML_BSSN::apply_dissipation="never"
>>> WARNING level 1 from host compute-0-46.local process 1
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:116:
>>> -> Forcing ML_BSSN::advectLapse=1 because
>>> ML_BSSN::LapseAdvectionCoeff=1.0
>>> WARNING level 1 from host compute-0-46.local process 1
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:134:
>>> -> Forcing ML_BSSN::advectShift=1 because
>>> ML_BSSN::ShiftAdvectionCoeff=1.0
>>> WARNING level 1 from host compute-0-46.local process 1
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:150:
>>> -> Parameter ML_BSSN::my_initial_data is outdated; please update the
>>> parameter file. Do not use this parameter, and set up initial
>>> conditions
>>> via ADMBase as usual.
>>> WARNING level 1 from host compute-0-46.local process 1
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:157:
>>> -> Parameter ML_BSSN::my_initial_boundary_condition is outdated;
>>> please
>>> update the parameter file. Do not use this parameter, and set up
>>> initial
>>> boundary conditions as usual.
>>> WARNING level 1 from host compute-0-46.local process 1
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:164:
>>> -> Parameter ML_BSSN::my_rhs_boundary_condition is outdated; please
>>> update the parameter file. Do not use this parameter, and set up RHS
>>> boundary conditions as usual.
>>> WARNING level 1 from host compute-0-46.local process 1
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:171:
>>> -> Parameter ML_BSSN::my_boundary_condition is outdated; please
>>> update
>>> the parameter file. Do not use this parameter, and set up RHS boundary
>>> conditions as usual.
>>> WARNING level 1 from host compute-0-46.local process 1
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:198:
>>> -> Parameter ML_BSSN::LapseAdvectionCoeff is outdated; please update
>>> the
>>> parameter file. Instead of using this parameter, you should set
>>> ML_BSSN::advectLapse.
>>> WARNING level 1 from host compute-0-46.local process 1
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:204:
>>> -> Parameter ML_BSSN::ShiftAdvectionCoeff is outdated; please update
>>> the
>>> parameter file. Instead of using this parameter, you should set
>>> ML_BSSN::advectShift.
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:15:
>>> -> Forcing ML_BSSN::initial_boundary_condition="extrapolate-gammas"
>>> because ML_BSSN::my_initial_boundary_condition="extrapolate-gammas"
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:28:
>>> -> Forcing ML_BSSN::rhs_boundary_condition="NewRad" because
>>> ML_BSSN::my_rhs_boundary_condition="NewRad"
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:47:
>>> -> Forcing ML_BSSN::epsDiss=0.0 because
>>> ML_BSSN::apply_dissipation="never"
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:15:
>>> -> Forcing ML_BSSN::initial_boundary_condition="extrapolate-gammas"
>>> because ML_BSSN::my_initial_boundary_condition="extrapolate-gammas"
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:28:
>>> -> Forcing ML_BSSN::rhs_boundary_condition="NewRad" because
>>> ML_BSSN::my_rhs_boundary_condition="NewRad"
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:47:
>>> -> Forcing ML_BSSN::epsDiss=0.0 because
>>> ML_BSSN::apply_dissipation="never"
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:116:
>>> -> Forcing ML_BSSN::advectLapse=1 because
>>> ML_BSSN::LapseAdvectionCoeff=1.0
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:116:
>>> -> Forcing ML_BSSN::advectLapse=1 because
>>> ML_BSSN::LapseAdvectionCoeff=1.0
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:134:
>>> -> Forcing ML_BSSN::advectShift=1 because
>>> ML_BSSN::ShiftAdvectionCoeff=1.0
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_WRAGH, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCompat
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:134:
>>> -> Forcing ML_BSSN::advectShift=1 because
>>> ML_BSSN::ShiftAdvectionCoeff=1.0
>>> INFO (MoL): Using Runge-Kutta 4 as the time integrator.
>>> INFO (SymBase): Symmetry on lower x-face: rotating_symmetry_180
>>> INFO (SymBase): Symmetry on lower z-face: reflection_symmetry
>>> INFO (MoL): The maximum number of evolved variables is 1250. 30 are
>>> registered.
>>> INFO (MoL): The maximum number of slow evolved variables is 1250. 0 are
>>> registered.
>>> INFO (MoL): The maximum number of constrained variables is 1250. 37 are
>>> registered.
>>> INFO (MoL): The maximum number of SandR variables is 1250. 0 are
>>> registered.
>>> INFO (MoL): The maximum number of evolved array variables is 1250. 0
>>> are
>>> registered.
>>> INFO (MoL): The maximum number of constrained array variables is 1250.
>>> 0
>>> are registered.
>>> INFO (MoL): The maximum number of SandR array variables is 1250. 0 are
>>> registered.
>>> INFO (MoL): The maximum size of any array variables is 0.
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:150:
>>> -> Parameter ML_BSSN::my_initial_data is outdated; please update the
>>> parameter file. Do not use this parameter, and set up initial
>>> conditions
>>> via ADMBase as usual.
>>> WARNING level 1 from host compute-0-46.local process 0
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:150:
>>> -> Parameter ML_BSSN::my_initial_data is outdated; please update the
>>> parameter file. Do not use this parameter, and set up initial
>>> conditions
>>> via ADMBase as usual.
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:157:
>>> -> Parameter ML_BSSN::my_initial_boundary_condition is outdated;
>>> please
>>> update the parameter file. Do not use this parameter, and set up
>>> initial
>>> boundary conditions as usual.
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:164:
>>> -> Parameter ML_BSSN::my_rhs_boundary_condition is outdated; please
>>> update the parameter file. Do not use this parameter, and set up RHS
>>> boundary conditions as usual.
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:171:
>>> -> Parameter ML_BSSN::my_boundary_condition is outdated; please
>>> update
>>> the parameter file. Do not use this parameter, and set up RHS boundary
>>> conditions as usual.
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:198:
>>> -> Parameter ML_BSSN::LapseAdvectionCoeff is outdated; please update
>>> the
>>> parameter file. Instead of using this parameter, you should set
>>> ML_BSSN::advectLapse.
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:204:
>>> -> Parameter ML_BSSN::ShiftAdvectionCoeff is outdated; please update
>>> the
>>> parameter file. Instead of using this parameter, you should set
>>> ML_BSSN::advectShift.
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:157:
>>> -> Parameter ML_BSSN::my_initial_boundary_condition is outdated;
>>> please
>>> update the parameter file. Do not use this parameter, and set up
>>> initial
>>> boundary conditions as usual.
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:164:
>>> -> Parameter ML_BSSN::my_rhs_boundary_condition is outdated; please
>>> update the parameter file. Do not use this parameter, and set up RHS
>>> boundary conditions as usual.
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:171:
>>> -> Parameter ML_BSSN::my_boundary_condition is outdated; please
>>> update
>>> the parameter file. Do not use this parameter, and set up RHS boundary
>>> conditions as usual.
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:198:
>>> -> Parameter ML_BSSN::LapseAdvectionCoeff is outdated; please update
>>> the
>>> parameter file. Instead of using this parameter, you should set
>>> ML_BSSN::advectLapse.
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_PARAMCHECK, routine
>>> ML_BSSN_Helper::ML_BSSN_ParamCheck
>>> in thorn ML_BSSN_Helper, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/ML_BSSN_Helper/Parameters.c:204:
>>> -> Parameter ML_BSSN::ShiftAdvectionCoeff is outdated; please update
>>> the
>>> parameter file. Instead of using this parameter, you should set
>>> ML_BSSN::advectShift.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin Hydro_Analysis_LocationSearch, routine
>>> Hydro_Analysis::Hydro_Analysis_LocationSearch_Combine
>>> in thorn Hydro_Analysis, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/Hydro_Analysis/Hydro_Analysis.c:199:
>>> -> Found more than one (2) identical maximum, using average location
>>> (15.1875,0,0).
>>> WARNING level 1 from host compute-0-46.local process 1
>>> while executing schedule bin Hydro_Analysis_LocationSearch, routine
>>> Hydro_Analysis::Hydro_Analysis_LocationSearch_Combine
>>> in thorn Hydro_Analysis, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/Hydro_Analysis/Hydro_Analysis.c:199:
>>> -> Found more than one (2) identical maximum, using average location
>>> (15.1875,0,0).
>>> WARNING level 1 from host compute-0-46.local process 0
>>> while executing schedule bin Hydro_Analysis_LocationSearch, routine
>>> Hydro_Analysis::Hydro_Analysis_LocationSearch_Combine
>>> in thorn Hydro_Analysis, file
>>> /home/hassan.khalvati.physics.sharif/NsNs/Cactus/configs/sim/build/Hydro_Analysis/Hydro_Analysis.c:199:
>>> -> Found more than one (2) identical maximum, using average location
>>> (15.1875,0,0).
>>> INFO (NSTracker): Found star at (15.1875,0,0)
>>> INFO (CarpetIOHDF5):
>>> ---------------------------------------------------------
>>> INFO (CarpetIOHDF5): Dumping initial checkpoint at iteration 0,
>>> simulation
>>> time 0
>>> INFO (CarpetIOHDF5):
>>> ---------------------------------------------------------
>>> WARNING level 2 from host compute-0-46.local process 0
>>> while executing schedule bin CCTK_ANALYSIS, routine
>>> QuasiLocalMeasures::qlm_calculate
>>> in thorn QuasiLocalMeasures, file qlm_calculate.F90:130:
>>> -> There were not enough past time levels available for accurate
>>> calculations
>>> INFO (TimerReport): Timer Report at iteration 0 time 0
>>> INFO (TimerReport): Top timers at iteration 0 time 0
>>>
>>>
>>>
>>>
>>>
>>> -----------------------------------
>>> Hassan Khalvati
>>> Master Student
>>> Department of Physics
>>> Sharif University of Technology
>>> Tehran, Azadi
>>> Hassan.khalvati at physics.sharif.edu
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at einsteintoolkit.org
>>> http://lists.einsteintoolkit.org/mailman/listinfo/users
>>
>>
>>
>> --
>> My email is as private as my paper mail. I therefore support encrypting
>> and signing email messages. Get my PGP key from http://pgp.mit.edu .
>>
>
> _______________________________________________
> Users mailing list
> Users at einsteintoolkit.org
> http://lists.einsteintoolkit.org/mailman/listinfo/users
>
More information about the Users
mailing list