User: eschnett Date: 2012/03/12 10:06 AM
Modified: / ET.tex /figures/ rot180-grid.fig, rot180-grid.pdf
Log: Improve figure 8
File Changes:
Directory: / ============
File [modified]: ET.tex Delta lines: +20 -15 =================================================================== --- ET.tex 2012-03-12 14:59:58 UTC (rev 279) +++ ET.tex 2012-03-12 15:06:41 UTC (rev 280) @@ -2377,22 +2377,27 @@ the moving objects. \begin{figure}[htbp] \begin{center} - \includegraphics[width=0.3\textwidth]{rot180-grid} + \includegraphics[width=0.4\textwidth]{rot180-grid} \end{center} - \caption{Grid layout created by \codename{CarpetRegrid2}. In this - example we use one ghost point, one boundary point, and two buffer - points - \todo{ES: this is the first (and only) mention of ``buffer points''} - as well as \codename{RotatingSymmetry180}. There are two refinement - levels present, a coarse one represented by big red circles and a - fine one represented by small black circles. The - filled black circle is the single point specified by the user. - \codename{CarpetRegrid2} surrounded it with a layer of buffer - points, indicated by the cyan filled circles. The open circles are - ghost and boundary points which are maintained by \codename{Carpet}. - The presence of the $\pi$-symmetry forces \codename{CarpetRegrid2} - to create the tiny region to the bottom left of the grid. It serves - only as a source for the boundary condition.} + % ES: This discussion also mentioned buffer points, but was the + % only place we mention buffer points. Also, the discussion below + % is quite complex even without buffer points, so I don't mention + % them any more. (This is technically correct, because the + % algorithm described below doesn't know about buffer points -- + % these are handled before and afterwards.) + \caption{Example of a grid layout created by + \codename{CarpetRegrid2}. In this example we use one boundary + point and one ghost point, as well as + \codename{RotatingSymmetry180}. This figure shows two refinement + levels, a coarse (big red circles) and a fine one (small black + circles). Starting from a user-specified refined region + consisting of $5\times3$ points (small, dark, filled circles in + the upper half), \codename{CarpetRegrid2} enforced the the + $\pi$-symmetry by adding the $2\times3$ block of refined points + in the lower half (small, light, filled circles). The open + circles are boundary and ghost points maintained by + \codename{Carpet}. The arrow demonstrates how the $\pi$-symmetry + fills in a boundary point.} \label{fig:rot180-grid} \end{figure}
Directory: /figures/ ====================
File [modified]: rot180-grid.fig Delta lines: +24 -24 =================================================================== --- figures/rot180-grid.fig 2012-03-12 14:59:58 UTC (rev 279) +++ figures/rot180-grid.fig 2012-03-12 15:06:41 UTC (rev 280) @@ -8,24 +8,18 @@ -2 1200 2 1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 7200 7200 335 335 7200 7200 7350 7500 -1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 7200 335 335 4800 7200 4950 7500 -1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 7200 2400 335 335 7200 2400 7350 2700 -1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 2400 335 335 4800 2400 4950 2700 1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 7200 4800 335 335 7200 4800 7350 5100 1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 4800 335 335 4800 4800 4950 5100 1 3 0 4 4 7 50 -1 20 0.000 1 0.0000 2400 7200 335 335 2400 7200 2550 7500 1 3 0 4 4 7 50 -1 20 0.000 1 0.0000 2400 2400 335 335 2400 2400 2550 2700 1 3 0 4 4 7 50 -1 20 0.000 1 0.0000 2400 4800 335 335 2400 4800 2550 5100 1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 9600 7200 335 335 9600 7200 9750 7500 -1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 9600 2400 335 335 9600 2400 9750 2700 1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 9600 4800 335 335 9600 4800 9750 5100 1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 12000 7200 335 335 12000 7200 12150 7500 1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 12000 2400 335 335 12000 2400 12150 2700 1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 12000 4800 335 335 12000 4800 12150 5100 1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 7200 0 335 335 7200 0 7350 300 -1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 0 335 335 4800 0 4950 300 1 3 0 4 4 7 50 -1 20 0.000 1 0.0000 2400 0 335 335 2400 0 2550 300 -1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 9600 0 335 335 9600 0 9750 300 1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 12000 0 335 335 12000 0 12150 300 1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 7200 9600 335 335 7200 9600 7350 9900 1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 9600 335 335 4800 9600 4950 9900 @@ -38,12 +32,11 @@ 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 3600 2400 150 150 3600 2400 3600 2550 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 10800 3600 150 150 10800 3600 10800 3750 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 10800 2400 150 150 10800 2400 10800 2550 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 8400 2400 150 150 8400 2400 8400 2550 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 9600 2400 150 150 9600 2400 9600 2550 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 2400 150 150 4800 2400 4800 2550 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 2400 150 150 6000 2400 6000 2550 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 7200 2400 150 150 7200 2400 7200 2550 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 7200 150 150 4800 7200 4800 7350 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 8400 2400 150 150 8400 2400 8550 2400 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 9600 2400 150 150 9600 2400 9750 2400 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 4800 2400 150 150 4800 2400 4950 2400 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 6000 2400 150 150 6000 2400 6150 2400 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 7200 2400 150 150 7200 2400 7350 2400 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 4800 6000 150 150 4800 6000 4800 6150 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 4800 3600 150 150 4800 3600 4800 3750 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 6000 3600 150 150 6000 3600 6000 3750 @@ -54,19 +47,18 @@ 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 3600 0 150 150 3600 0 3600 150 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 10800 1200 150 150 10800 1200 10800 1350 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 10800 0 150 150 10800 0 10800 150 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 8400 0 150 150 8400 0 8400 150 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 9600 0 150 150 9600 0 9600 150 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 9600 1200 150 150 9600 1200 9600 1350 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 8400 1200 150 150 8400 1200 8400 1350 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 7200 1200 150 150 7200 1200 7200 1350 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 1200 150 150 6000 1200 6000 1350 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 1200 150 150 4800 1200 4800 1350 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 8400 0 150 150 8400 0 8550 0 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 9600 0 150 150 9600 0 9750 0 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 9600 1200 150 150 9600 1200 9750 1200 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 8400 1200 150 150 8400 1200 8550 1200 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 7200 1200 150 150 7200 1200 7350 1200 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 6000 1200 150 150 6000 1200 6150 1200 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 4800 1200 150 150 4800 1200 4950 1200 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 3600 9600 150 150 3600 9600 3600 9750 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 3600 8400 150 150 3600 8400 3600 8550 1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 8400 150 150 4800 8400 4800 8550 1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 9600 150 150 4800 9600 4800 9750 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 0 150 150 4800 0 4800 150 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 0 150 150 6000 0 6000 150 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 6000 0 150 150 6000 0 6150 0 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 7200 6000 150 150 7200 6000 7200 6150 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 7200 7200 150 150 7200 7200 7200 7350 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 7200 8400 150 150 7200 8400 7200 8550 @@ -74,8 +66,16 @@ 1 3 0 4 0 7 49 -1 20 0.000 1 0.0000 6000 6000 150 150 6000 6000 6000 6150 1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 9600 150 150 6000 9600 6150 9600 1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 8400 150 150 6000 8400 6000 8550 -1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 7200 150 150 6000 7200 6000 7350 1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 7200 0 150 150 7200 0 7200 150 +1 3 0 4 0 0 49 -1 20 0.000 1 0.0000 4800 0 150 150 4800 0 4950 0 +1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 0 335 335 4800 0 4950 300 +1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 9600 0 335 335 9600 0 9750 300 +1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 2400 335 335 4800 2400 4950 2700 +1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 7200 2400 335 335 7200 2400 7350 2700 +1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 9600 2400 335 335 9600 2400 9750 2700 +1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 6000 7200 150 150 6000 7200 6150 7200 +1 3 0 4 4 4 50 -1 20 0.000 1 0.0000 4800 7200 335 335 4800 7200 4950 7500 +1 3 0 4 0 16 49 -1 20 0.000 1 0.0000 4800 7200 150 150 4800 7200 4800 7350 2 1 1 4 0 16 51 -1 -1 10.000 0 0 -1 1 0 2 1 1 1.00 60.00 120.00 2400 4800 12000 4800 @@ -92,5 +92,5 @@ 2 0 4.00 180.00 480.00 6000 9600 2400 4800 3600 0 0.000 1.000 0.000 -4 1 0 49 -1 0 48 0.0000 4 735 1650 450 5700 y = 0\001 -4 1 0 49 -1 0 48 0.0000 4 570 1650 4800 12150 x = 0\001 +4 1 0 49 -1 0 48 0.0000 4 735 1635 450 5700 y = 0\001 +4 1 0 49 -1 0 48 0.0000 4 555 1635 4800 12150 x = 0\001
File [modified]: rot180-grid.pdf Delta lines: +0 -0 =================================================================== (Binary files differ)