Trac August 2013

trac@lists.einsteintoolkit.org

1 participants
148 discussions

[Einstein Toolkit] #727: Test output changes every time some tests are run
by Einstein Toolkit 08 Dec '14

08 Dec '14

#727: Test output changes every time some tests are run -----------------------------------------------------------+---------------- Reporter: hinder | Owner: Type: defect | Status: new Priority: major | Milestone: Component: EinsteinToolkit thorn | Version: Keywords: testsuites QuasiLocalMeasures IDAxiOddBrillBH | -----------------------------------------------------------+---------------- Each time a new run of the test suites is performed, the test output of IDAxiOddBrillBH and QuasiLocalMeasures changes a little. These changes are below the tolerances set in the test.ccl files, so the tests pass, but there should be no change at all when the tests are run on the same machine. An example of the difference from one test run to the next is shown at http://git.barrywardell.net/EinsteinToolkitTestResults.git/blobdiff/95fe088…. Another example, from QuasiLocalMeasures, is at http://git.barrywardell.net/EinsteinToolkitTestResults.git/blobdiff/95fe088… /qlm-ks-shifted/admbase::metric.average.asc. The only thorns to exhibit this behaviour are IDAxiOddBrillBH and QuasiLocalMeasures. All other test data remains unchanged from one test run to the next. Note that the two test runs will be performed with different executables, since a new configuration is created for each run. I think I remember testing that simply re-running the same executable resulted in the same test output. Is it possible that there are a small number of points which access uninitialised memory which changes on each run for these thorns? -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/727> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 6

[Einstein Toolkit] #582: Semi-automatically split McLachlan's calculations
by Einstein Toolkit 08 Dec '14

08 Dec '14

#582: Semi-automatically split McLachlan's calculations -----------------------------------+---------------------------------------- Reporter: eschnett | Owner: Type: enhancement | Status: new Priority: major | Milestone: Component: EinsteinToolkit thorn | Version: Keywords: | -----------------------------------+---------------------------------------- Split McLachlan's calculations semi-automatically in two ways: (a) by variable, so that e.g. dot[g] and dot[K] are calculated separately, and (b) by pattern, so that advection terms, dissipation, and "everything else" are calculated separately. Also introduce parameters to choose which routines are called at run time. This is somewhat a work in progress, in that the patch is good, but the API defined to split kernels is more complex and less failsafe than it should be. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/582> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 10

[Einstein Toolkit] #1071: ensure atmosphere is properly set after ID
by Einstein Toolkit 08 Dec '14

08 Dec '14

#1071: ensure atmosphere is properly set after ID -----------------------------------+---------------------------------------- Reporter: knarf | Owner: Type: defect | Status: new Priority: major | Milestone: ET_2012_11 Component: EinsteinToolkit thorn | Version: development version Keywords: | -----------------------------------+---------------------------------------- At the moment GRHydro doesn't ensure properly that the atmosphere is set after initial data. This is no problem as long as the ID thorn takes care of this, the ID doesn't contain atmosphere or the EOS is sufficiently robust to 'recover'. However, this is not always the case. Thus, I propose to set the atmosphere mask in PostInitial, initializing it according to whatever was setup there by some other thorn. The patch to do that is attached. It is only a change to schedule.ccl as the corresponding function already exists. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1071> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 21

[Einstein Toolkit] #1152: Add option to compute center of mass to hydro_analysis and lots of smaller changes
by Einstein Toolkit 01 Dec '14

01 Dec '14

#1152: Add option to compute center of mass to hydro_analysis and lots of smaller changes -----------------------------------+---------------------------------------- Reporter: rhaas | Owner: Type: enhancement | Status: new Priority: minor | Milestone: Component: EinsteinToolkit thorn | Version: Keywords: Hydro_Analysis | -----------------------------------+---------------------------------------- The attached set of patches adds the possibility to compute a center of mass location to hydro_analysis. It works by computing the center of mass (via x[idx]*rho[idx]) of the matter in a region of radius Hydro_Analysis_r_core around the point of maximum density. Only points whose density is above a fraction Hydro_Analysis_rho_core_rel_min of the maximum density are considered. I also include a number of bugfix patches and patches to make Hydro_Analysis more controllable by user input rather than hard-coded values. All patches contain a short description in the patch (ie. the git commit message). The ones adding extra control and/or warnings are: * Hydro_Analysis: add verbosity_level option to control how much data to output to stdout * Hydro_Analysis: use Fortran modules for prototypes if available * Hydro_Analysis: add parameters to control which interpolator is used * Hydro_Analysis: make parameters steerable * Hydro_Analysis: warn if grid point with maximum value cannot be found on grid * Hydro_Analysis: add parameter Hydro_Analysis_comp_rho_max_every * Hydro_Analysis: add option rho_max_loc_use_rotatingsymmetry180 * Hydro_Analysis: add option to average the location of multiple identical maxima * Hydro_Analysis: fiddle with when to warn about multiple identical maxima Bugfixes are: * Hydro_Analysis: checkpoint grid scalars * Hydro_Analysis: do reduction in global mode New feature: * Hydro_Analysis: add routine to compute center of mass in core region -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1152> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 19

[Einstein Toolkit] #1006: ExternalLibraries' configure.sh scripts handle /usr inconistently
by Einstein Toolkit 26 Nov '14

26 Nov '14

#1006: ExternalLibraries' configure.sh scripts handle /usr inconistently -----------------------------------+---------------------------------------- Reporter: rhaas | Owner: Type: defect | Status: new Priority: minor | Milestone: Component: EinsteinToolkit thorn | Version: Keywords: ExternalLibraries | -----------------------------------+---------------------------------------- library path used for -L should not contain the system paths at least /lib, /lib64, /usr/lib, /usr/lib64, /usr/local/lib, /usr/local/lib64 (plus MacOS equivalents, and any other OS we support). -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1006> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 10

[Einstein Toolkit] #1338: Rename Carpet output files
by Einstein Toolkit 25 Nov '14

25 Nov '14

#1338: Rename Carpet output files ----------------------+----------------------------------------------------- Reporter: eschnett | Owner: eschnett Type: defect | Status: new Priority: major | Milestone: Component: Carpet | Version: Keywords: | ----------------------+----------------------------------------------------- Windows does not allow colons in file names. Output files produced by Carpet's should therefore not use colons. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1338> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 36

[Einstein Toolkit] #1360: TAT/TATPETSc has no (ET-only) testsuite
by Einstein Toolkit 10 Nov '14

10 Nov '14

#1360: TAT/TATPETSc has no (ET-only) testsuite -----------------------------------+---------------------------------------- Reporter: knarf | Owner: Type: enhancement | Status: new Priority: minor | Milestone: ET_2013_11 Component: EinsteinToolkit thorn | Version: development version Keywords: | -----------------------------------+---------------------------------------- It would be nice if TATPETSc, being part of the ET, would have at least one testsuite that can actually run using the ET only. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1360> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 3

[Einstein Toolkit] #1317: GRHydro should provide _one_ mechanism to set a GP to atmosphere
by Einstein Toolkit 10 Nov '14

10 Nov '14

#1317: GRHydro should provide _one_ mechanism to set a GP to atmosphere -----------------------------------+---------------------------------------- Reporter: knarf | Owner: Type: enhancement | Status: new Priority: minor | Milestone: Component: EinsteinToolkit thorn | Version: development version Keywords: | -----------------------------------+---------------------------------------- GRHydro should provide _one_ mechanism to set a GP to atmosphere which should then be used whenever that should be the case. Right now, this is copied in several places. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1317> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 4

[Einstein Toolkit] #1075: Test cases with specific number of processes
by Einstein Toolkit 20 Oct '14

20 Oct '14

#1075: Test cases with specific number of processes -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: Type: enhancement | Status: new Priority: major | Milestone: Component: Cactus | Version: Keywords: | -------------------------+-------------------------------------------------- Some test cases require a specific number of processes. Instead not running, they should run on that number of processes. This would ensure that all tests execute all the time. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1075> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 40

[Einstein Toolkit] #1158: ExternalLibraries/HDF5 should change the defaults for HDF5_ENABLE_CXX and HDF5_ENABLE_FORTRAN to "no".
by Einstein Toolkit 13 Oct '14

13 Oct '14

#1158: ExternalLibraries/HDF5 should change the defaults for HDF5_ENABLE_CXX and HDF5_ENABLE_FORTRAN to "no". -----------------------------------+---------------------------------------- Reporter: knarf | Owner: Type: defect | Status: new Priority: minor | Milestone: Component: EinsteinToolkit thorn | Version: development version Keywords: | -----------------------------------+---------------------------------------- ExternalLibraries/HDF5 should change the defaults for HDF5_ENABLE_CXX and HDF5_ENABLE_FORTRAN to "no". Nothing within the toolkit or Cactus still uses these interfaces and system wide installed libraries might not come with it, leading to link failures. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1158> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 30

← Newer
1
...
4
5
6
7
8
9
10
...
15
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Trac August 2013