Trac October 2014

trac@lists.einsteintoolkit.org

1 participants
147 discussions

[Einstein Toolkit] #1635: hwloc requires a certain minimum version, but does not check for it
by Einstein Toolkit 20 Jan '15

20 Jan '15

#1635: hwloc requires a certain minimum version, but does not check for it --------------------+------------------------------------------------------- Reporter: knarf | Owner: Type: defect | Status: new Priority: major | Milestone: ET_2014_11 Component: Cactus | Version: development version Keywords: | --------------------+------------------------------------------------------- Currently, hwloc's configuration.sh searched for any hwloc library and uses it. However, it requires a pretty new version within some of its own files, which leads to build failure on, e.g. Debian stable systems. The attached patch uses pkg-config to get the version of the installed hwloc library and if that version is older than 1.6 (educated guess, but see http://lists.einsteintoolkit.org/pipermail/users/2013-February/002860.html), builds the bundled version even if another version is installed (but too old). Note that this is done (intentionally) only if no library was specified, and the script was looking for it by itself. This allows users to specify something which will not be overwritten by this mechanism. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1635> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 14

[Einstein Toolkit] #428: Forbid configuration names ending in -reconfig
by Einstein Toolkit 12 Jan '15

12 Jan '15

#428: Forbid configuration names ending in -reconfig ----------------------+----------------------------------------------------- Reporter: eschnett | Owner: Type: defect | Status: new Priority: minor | Milestone: Component: Cactus | Version: Keywords: | ----------------------+----------------------------------------------------- I accidentally created a Cactus configuration with a name like "sim- reconfig". This confuses Cactus, because the command "make sim-reconfig" can then mean either to build the "sim-reconfig" configuration, or to reconfigure the "sim" configuration. Cactus should catch and forbid these cases. This is probably most cleanly handled by using a script instead of a Makefile to interpret the user commands. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/428> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 12

[Einstein Toolkit] #1610: Switch Cactus to 64 bits
by Einstein Toolkit 29 Dec '14

29 Dec '14

#1610: Switch Cactus to 64 bits -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: Type: enhancement | Status: new Priority: major | Milestone: Component: Cactus | Version: development version Keywords: | -------------------------+-------------------------------------------------- Although pointers can have 64 bits, integers in Cactus are de facto (since we use "int" in many places) restricted to 32 bits. This limit is easily reached, and this has in fact been a problem on at least two occasions. One issue comes from Carpet's numbering of grid points. With 25 refinement levels, the coarse grid can be at most 127^3, and this limit was reached in production simulations years ago. Another issue comes from large 1D arrays. It is easily possible to have a 1D array with 10M (10^7) elements that is replicated across processes (distrib=const). In this case, one can use at most 200 MPI processes. We should devise a plan to switch Cactus to 64 bits. One option would be to replace most "int" by "CCTK_INT", so that those affected can switch these to 64 bits. I want to note that using 64-bit loop counters is often slightly faster than using 32-bit loop counters (on 64-bit architectures), since the 32->64 bit conversion for array indexing can be omitted. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1610> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 3

[Einstein Toolkit] #1565: change default of IOUtil::out_save_parameters to true
by Einstein Toolkit 15 Dec '14

15 Dec '14

#1565: change default of IOUtil::out_save_parameters to true -------------------------+-------------------------------------------------- Reporter: rhaas | Owner: Type: enhancement | Status: new Priority: optional | Milestone: Component: Cactus | Version: development version Keywords: | -------------------------+-------------------------------------------------- it would be useful of HDF5 files contained the full set of parameter values. This can be used by postprocessing scripts to find out eg about the symmetry conditions or some of the grid structure parameters as well as atmosphere settings. IOUtil::out_save_parameters controls whether the full set of parameters or only those that have been steered are written to file (for regular output, checkpoints always write all parameters). I would like to change the default so that all parameters are always written. If feasible I would even want to write all parameter changes to file (either as full parameter dumps for each output or as a full dump when the simulation starts then deltas afterwards). -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1565> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 19

[Einstein Toolkit] #1667: ExternalLibraries/MPI should report error messages
by Einstein Toolkit 09 Dec '14

09 Dec '14

#1667: ExternalLibraries/MPI should report error messages --------------------+------------------------------------------------------- Reporter: hinder | Owner: Type: defect | Status: new Priority: minor | Milestone: Component: Cactus | Version: development version Keywords: MPI | --------------------+------------------------------------------------------- I am trying to compile the ET on Datura, and MPI configuration is failing. The error message is: {{{ Running configuration script for thorn MPI: Found mpi compiler wrapper at /cluster/openmpi/SL6/1.7.2/intel14/bin/mpic++! MPI could not be configured. CST error 1: -> Configuration script for thorn MPI returned exit code 5 (no error message) Finished running configuration script for thorn MPI. }}} The configuration script should report any errors to the user. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1667> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 23

[Einstein Toolkit] #1628: Enable padding by default
by Einstein Toolkit 09 Dec '14

09 Dec '14

#1628: Enable padding by default -----------------------------------+---------------------------------------- Reporter: eschnett | Owner: Type: enhancement | Status: new Priority: major | Milestone: Component: EinsteinToolkit thorn | Version: development version Keywords: | -----------------------------------+---------------------------------------- Enable padded allocation in Carpet by default. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1628> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 2

[Einstein Toolkit] #1630: ML_BSSN harmonic shift is ill-posed
by Einstein Toolkit 09 Dec '14

09 Dec '14

#1630: ML_BSSN harmonic shift is ill-posed -----------------------------------+---------------------------------------- Reporter: eschnett | Owner: Type: defect | Status: new Priority: major | Milestone: Component: EinsteinToolkit thorn | Version: development version Keywords: | -----------------------------------+---------------------------------------- The implementation of the ML_BSSN harmonic shift is ill-posed. It should use the evolved Gamma variables instead of taking metric derivatives. A robust stability test clearly shows an instability: higher resolutions have faster growing errors. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1630> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #1632: problem with compilation
by Einstein Toolkit 09 Dec '14

09 Dec '14

#1632: problem with compilation -----------------------------------+---------------------------------------- Reporter: barmv | Owner: new user Type: defect | Status: new Priority: critical | Milestone: ET_2014_05 Component: EinsteinToolkit thorn | Version: development version Keywords: GRHydro Utils F90 | -----------------------------------+---------------------------------------- Ubuntu workstation, gcc and gfortran compilers. $./GetComponents --parallel https://svn.einsteintoolkit.org/manifest/branches/ET_2014_05/einsteintoolki… after that make the configuration $./simfactory/bin/sim setup --optionlist=ubuntu.cfg --runscript debian.sh but fail to do build of the project $./simfactory/bin/sim build ******************************************************************************** Running configuration script for thorn HWLOC: hwloc selected, but HWLOC_DIR not set. Checking some places... Found hwloc in /usr Finished running configuration script for thorn HWLOC. Checking consistency... Creating Thorn-Flesh bindings... Creating implementation bindings... Creating parameter bindings... Creating variable bindings... Creating schedule bindings... Creating function bindings... ------------------------------------------------------ There were 2 errors during execution of the CST These must be corrected before compilation can proceed ------------------------------------------------------ ------------------------------------------------------ Warnings were generated during execution of the CST ------------------------------------------------------ CST error 1: -> Configuration script for thorn FORTRAN returned exit code 1 Error message: 'Fortran thorn requires that a Fortran compiler is defined, but F77 = 'none' and F90 = 'none'. Aborting.' CST error 2: -> Configuration script for thorn LORENE returned exit code 1 (no error message) ------------------------------------------------------ make[1]: *** [/home/Cactus/configs/sim/config-data/make.thornlist] Error 1 make: *** [sim] Error 2 /////////////////////////////////////////////////////// After that $make config $make test1 $make test1 2&> test1_log.txt The compilation of the cactus report errors in file Cactus/configs/test1/build/GRHydro/Utils.f90 COMPILING arrangements/EinsteinEvolve/GRHydro/src/Utils.F90 Warning: Nonexistent include directory "/home/bmv/utils/soft/cactus/Cactus/arrangements/EinsteinEvolve/GRHydro/src/include" Warning: Nonexistent include directory "/home/bmv/utils/soft/cactus/Cactus/arrangements/EinsteinEvolve/GRHydro/src/include" /home/bmv/utils/soft/cactus/Cactus/configs/test1/build/GRHydro/Utils.f90:2879.10: pointer (pg11,g11), (pg12,g12), (pg13,g13), (pg22,g22), (pg23,g23), (pg33,g33) 1 Error: Cray pointer declaration at (1) requires -fcray-pointer flag /home/bmv/utils/soft/cactus/Cactus/configs/test1/build/GRHydro/Utils.f90:2882.8: pg11 = loc(gaa) 1 Error: Symbol 'pg11' at (1) has no IMPLICIT type /home/bmv/utils/soft/cactus/Cactus/configs/test1/build/GRHydro/Utils.f90:2883.8: pg12 = loc(gab) 1 Error: Symbol 'pg12' at (1) has no IMPLICIT type /home/bmv/utils/soft/cactus/Cactus/configs/test1/build/GRHydro/Utils.f90:2884.8: pg13 = loc(gac) 1 Error: Symbol 'pg13' at (1) has no IMPLICIT type /home/bmv/utils/soft/cactus/Cactus/configs/test1/build/GRHydro/Utils.f90:2885.8: pg22 = loc(gbb) 1 Error: Symbol 'pg22' at (1) has no IMPLICIT type /home/bmv/utils/soft/cactus/Cactus/configs/test1/build/GRHydro/Utils.f90:2886.8: pg23 = loc(gbc) 1 Error: Symbol 'pg23' at (1) has no IMPLICIT type /home/bmv/utils/soft/cactus/Cactus/configs/test1/build/GRHydro/Utils.f90:2887.8: pg33 = loc(gcc) 1 Error: Symbol 'pg33' at (1) has no IMPLICIT type make[3]: *** [Utils.F90.o] Error 1 make[2]: *** [make.checked] Error 2 make[1]: *** [/home/Cactus/configs/test1/lib/libthorn_GRHydro.a] Error 2 make: *** [test1] Error 2 -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1632> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 12

[Einstein Toolkit] #1636: check and abort if more timelevels are requested than time hierarchy supports
by Einstein Toolkit 09 Dec '14

09 Dec '14

#1636: check and abort if more timelevels are requested than time hierarchy supports -------------------------+-------------------------------------------------- Reporter: rhaas | Owner: eschnett Type: enhancement | Status: new Priority: minor | Milestone: Component: Carpet | Version: development version Keywords: | -------------------------+-------------------------------------------------- In order to provide a more user friendly fix for #626 we want to change Carpet (and PUGH?) such that they check at runtime, when memory is allocated that the number of requested timelevels is less or equal than what the time hierarchy (controlled by the max_timelevels) parameter supports. This check should be done early and should take the checkpoint tag as well as prolongation operator tags into account. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1636> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #1639: CCTK_ATTRIBUTES
by Einstein Toolkit 09 Dec '14

09 Dec '14

#1639: CCTK_ATTRIBUTES -----------------------+---------------------------------------------------- Reporter: anonymous | Owner: jtao Type: defect | Status: new Priority: minor | Milestone: Component: Cactus | Version: development version Keywords: | -----------------------+---------------------------------------------------- In CommOverloadables.h #define ATTRIBUTES CCTK_ATTRIBUTE_NORETURN OVERLOADABLE(Exit) OVERLOADABLE(Abort) Exit and Abort are defined as functions returning an integer, but they are explicitly set with noreturn in CommOverloadables.h. This will also cause a warning for CCTK_VError (was set attribute as no return in the definition too), which calls CCTK_Abort that returns an integer. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1639> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 2

← Newer
1
...
7
8
9
10
11
12
13
14
15
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Trac October 2014