Trac February 2011

trac@lists.einsteintoolkit.org

1 participants
134 discussions

[Einstein Toolkit] #294: Idea for interactive commands running a command
by Einstein Toolkit 17 Feb '11

17 Feb '11

#294: Idea for interactive commands running a command -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: enhancement | Status: new Priority: major | Milestone: Component: SimFactory | Version: Keywords: | -------------------------+-------------------------------------------------- On some systems, one can use ssh to access compute nodes if one has a job running there (e.g. on Longhorn at TACC). In this case, Simfactory can submit a regular job executing a sleep command, can poll (every minute) whether the job is running, and if so, log in to the corresponding compute node. As suggested above, this mechanism is even necessary on some systems (Longhorn), where no other interactive access to compute nodes is possible. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/294> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 0

[Einstein Toolkit] #292: Support interactive commands on Lincoln
by Einstein Toolkit 17 Feb '11

17 Feb '11

#292: Support interactive commands on Lincoln ------------------------+--------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: defect | Status: new Priority: major | Milestone: Component: SimFactory | Version: Keywords: | ------------------------+--------------------------------------------------- Interactive commands are not yet supported on Lincoln -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/292> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #290: "iomachine" ignored for syncing
by Einstein Toolkit 15 Feb '11

15 Feb '11

#290: "iomachine" ignored for syncing ------------------------+--------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: defect | Status: new Priority: major | Milestone: Component: SimFactory | Version: Keywords: | ------------------------+--------------------------------------------------- I think the "iomachine" MDB entry is not used when syncing to a machine. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/290> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 0

[Einstein Toolkit] #286: Writing/reading grid structure should be explicit operations
by Einstein Toolkit 14 Feb '11

14 Feb '11

#286: Writing/reading grid structure should be explicit operations -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: eschnett Type: enhancement | Status: new Priority: minor | Milestone: Component: Carpet | Version: Keywords: | -------------------------+-------------------------------------------------- Carpet should offer explicit routines to write and read all grid structure metadata. One method could be to serialise this information to a string that can then either be written to HDF5 (as is done now), or could be interpreted by post-processing scripts. This would clean up checkpointing, and would also allow reading/writing arbitrary grid functions at a later time. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/286> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 0

[Einstein Toolkit] #257: Add support for Hopper II
by Einstein Toolkit 12 Feb '11

12 Feb '11

#257: Add support for Hopper II -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: enhancement | Status: new Priority: minor | Milestone: Component: SimFactory | Version: Keywords: | -------------------------+-------------------------------------------------- -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/257> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #284: Set cache characteristics
by Einstein Toolkit 11 Feb '11

11 Feb '11

#284: Set cache characteristics -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: enhancement | Status: new Priority: minor | Milestone: Component: SimFactory | Version: Keywords: | -------------------------+-------------------------------------------------- When building, set the Cactus configuration variables CACHELINE_BYTES and CACHE_SIZE from the corresponding MDB entries, if defined. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/284> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 4

[Einstein Toolkit] #211: Unexpected output before "sync"
by Einstein Toolkit 11 Feb '11

11 Feb '11

#211: Unexpected output before "sync" ------------------------+--------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: defect | Status: new Priority: minor | Milestone: Component: SimFactory | Version: Keywords: | ------------------------+--------------------------------------------------- When I run "sim sync numrel02", I see unexpected output before sim starts. I refer to the lines stating "executing command: /bin/bash ps". These lines should probably not be output. $ ./bin/sim sync numrel02 DEBUG: Simfactory command: ./bin/../simfactory/lib/sim.py "sync" "numrel02" DEBUG: Version 1125:1135 The Simulation Factory: Manage Cactus simulations Info: defs: /Users/eschnett/EinsteinToolkit-hg/simfactory/etc/defs.ini Info: defs.local: /Users/eschnett/EinsteinToolkit- hg/simfactory/etc/defs.local.ini Info: executing command: /bin/bash -c '{ { :; } && { ps 62110; }; } 2>&1' Info: executing command: /bin/bash -c '{ { :; } && { ps 62162; }; } 2>&1' Info: executing command: /bin/bash -c '{ { :; } && { ps 62215; }; } 2>&1' Info: executing command: /bin/bash -c '{ { :; } && { ps 62272; }; } 2>&1' Info: executing command: /bin/bash -c '{ { :; } && { ps 62334; }; } 2>&1' Info: executing command: /bin/bash -c '{ { :; } && { ps 62402; }; } 2>&1' Info: executing command: /bin/bash -c '{ { :; } && { ps 62472; }; } 2>&1' Info: executing command: /bin/bash -c '{ { :; } && { ps 62554; }; } 2>&1' Info: executing command: /bin/bash -c '{ { :; } && { ps 62628; }; } 2>&1' Info: executing command: /bin/bash -c '{ { :; } && { ps 62708; }; } 2>&1' Info: executing command: /bin/bash -c '{ { :; } && { ps 62779; }; } 2>&1' Info: executing command: /bin/bash -c '{ { :; } && { ps 62853; }; } 2>&1' Info: using machines: ['numrel02'] Info: current working directory: /Users/eschnett/EinsteinToolkit-hg Cactus Directory: /Users/eschnett/EinsteinToolkit-hg -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/211> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #277: list-simulations is incomplete
by Einstein Toolkit 10 Feb '11

10 Feb '11

#277: list-simulations is incomplete ------------------------+--------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: defect | Status: new Priority: major | Milestone: Component: SimFactory | Version: Keywords: | ------------------------+--------------------------------------------------- list-simulations does not distinguish between active and inactive simulations. Only active simulations have a current restart. Also, a simulation can never be "HELD", since this indicates a presubmitted restart (and is not a simulation state). If a simulation has no valid restarts, then it is simply inactive, and a restart was never submitted. The message "skipping" sounds as if there was a problem, but there is none. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/277> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #269: new python simfactory revision does not create a new simulation directory automatically at submit
by Einstein Toolkit 10 Feb '11

10 Feb '11

#269: new python simfactory revision does not create a new simulation directory automatically at submit ----------------------------------------------+----------------------------- Reporter: alexander.beck-ratzka@… | Owner: mthomas Type: defect | Status: new Priority: minor | Milestone: Component: SimFactory | Version: Keywords: simfactory submit | ----------------------------------------------+----------------------------- With a revision of mid of December it was possible to create a new simulation directory automatically using simfactory/sim submit In the newest revision 1191 (4.2.2011) this is not possible any longer. It is required now to use simfactory/sim create-submit -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/269> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #266: simfactory should be callable for 'login' operations from anywhere
by Einstein Toolkit 10 Feb '11

10 Feb '11

#266: simfactory should be callable for 'login' operations from anywhere ------------------------+--------------------------------------------------- Reporter: knarf | Owner: mthomas Type: defect | Status: new Priority: minor | Milestone: Component: SimFactory | Version: Keywords: | ------------------------+--------------------------------------------------- I tried 'sim login philip' from outside my sourcebasedir. I expected to be logged into philip. However, simfactory insisted that I should be inside a subdir of sourcebasedir. I don't think this is actually needed for the 'login' process, is it? -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/266> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 4

← Newer
1
...
8
9
10
11
12
13
14
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Trac February 2011