#467: Make table printing functions publicly accessible
-------------------------+--------------------------------------------------
Reporter: eschnett | Owner:
Type: enhancement | Status: new
Priority: minor | Milestone:
Component: Cactus | Version:
Keywords: |
-------------------------+--------------------------------------------------
The table data types (util_Table.h) have internal routines that print the
table contents to screen. This can be helpful for debugging. The attached
patch makes these functions publicly available.
--
Ticket URL: <https://trac.einsteintoolkit.org/ticket/467>
Einstein Toolkit <http://einsteintoolkit.org>
The Einstein Toolkit
#532: Don't copy .svn directories when running test cases
-------------------------+--------------------------------------------------
Reporter: eschnett | Owner: eschnett
Type: enhancement | Status: new
Priority: minor | Milestone:
Component: SimFactory | Version:
Keywords: |
-------------------------+--------------------------------------------------
Don't copy .svn or .git directories when running test cases. We probably
have a list of excluded directories somewhere that we could reuse.
--
Ticket URL: <https://trac.einsteintoolkit.org/ticket/532>
Einstein Toolkit <http://einsteintoolkit.org>
The Einstein Toolkit
#530: Change default for --num-threads
-------------------------+--------------------------------------------------
Reporter: eschnett | Owner: eschnett
Type: enhancement | Status: new
Priority: major | Milestone:
Component: SimFactory | Version:
Keywords: |
-------------------------+--------------------------------------------------
Change the default for --num-threads to be what the MDB specifies for the
particular machine, instead of using a single thread by default.
--
Ticket URL: <https://trac.einsteintoolkit.org/ticket/530>
Einstein Toolkit <http://einsteintoolkit.org>
The Einstein Toolkit
#563: Do not copy .svn directories for test suite
------------------------+---------------------------------------------------
Reporter: eschnett | Owner: eschnett
Type: defect | Status: new
Priority: major | Milestone:
Component: SimFactory | Version:
Keywords: |
------------------------+---------------------------------------------------
Simfactory copies the content of .svn directories when it copies the test
case data into the simulation directory. The problem is line 509 in
simrestart.py; this rsync command doesn't exclude .svn directories.
--
Ticket URL: <https://trac.einsteintoolkit.org/ticket/563>
Einstein Toolkit <http://einsteintoolkit.org>
The Einstein Toolkit
#581: Pass unallocated arrays to Fortran as NULL pointers
-------------------------+--------------------------------------------------
Reporter: eschnett | Owner:
Type: enhancement | Status: new
Priority: major | Milestone:
Component: Cactus | Version:
Keywords: |
-------------------------+--------------------------------------------------
The deleted comment is wrong. We should always pass unallocated arrays
to Fortran to catch allocation errors.
--
Ticket URL: <https://trac.einsteintoolkit.org/ticket/581>
Einstein Toolkit <http://einsteintoolkit.org>
The Einstein Toolkit
#596: ET installation problem.
-----------------------+----------------------------------------------------
Reporter: anonymous | Type: defect
Status: new | Priority: major
Milestone: | Component: Other
Version: | Keywords:
-----------------------+----------------------------------------------------
Hello,
My name is Maxim.
I try to get the ET from instruction in tutorial:
On the step
wget --no-check-certificate
https://github.com/gridaphobe/CRL/raw/ET_2011_05/GetComponents
chmod 755 GetComponents
./GetComponents -a
http://svn.einsteintoolkit.org/manifest/branches/ET_2011_05/einsteintoolkit…
Not all throns is downloaded.
0 components checked out.
140 components updated.
Unable to process simfactory
Unable to process LSUThorns/QuasiLocalMeasures
Unable to process LSUThorns/SummationByParts
Unable to process LSUThorns/Vectors
Unable to process KrancNumericalTools/GenericFD
Unable to process McLachlan/doc
Unable to process McLachlan/m
Unable to process McLachlan/par
Unable to process McLachlan/ML_ADMConstraints
Unable to process McLachlan/ML_ADMQuantities
Unable to process McLachlan/ML_BSSN
Unable to process McLachlan/ML_BSSN_Helper
Unable to process McLachlan/ML_BSSN_O2
Unable to process McLachlan/ML_BSSN_O2_Helper
Unable to process McLachlan/ML_BSSN_Test
Unable to process Carpet/doc
Unable to process Carpet/Carpet
Unable to process Carpet/CarpetEvolutionMask
Unable to process Carpet/CarpetIOASCII
Unable to process Carpet/CarpetIOBasic
Unable to process Carpet/CarpetIOHDF5
Unable to process Carpet/CarpetIOScalar
Unable to process Carpet/CarpetInterp
Unable to process Carpet/CarpetInterp2
Unable to process Carpet/CarpetLib
Unable to process Carpet/CarpetMask
Unable to process Carpet/CarpetReduce
Unable to process Carpet/CarpetRegrid
Unable to process Carpet/CarpetRegrid2
Unable to process Carpet/CarpetSlab
Unable to process Carpet/CarpetTracker
Unable to process Carpet/LoopControl
Unable to process GetComponents
Time Elapsed: 108 minutes, 23 seconds
I have repeat it 3 times, the result is the same.
How to solve this problem?
With Best Regards,
Maxim
--
Ticket URL: <https://trac.einsteintoolkit.org/ticket/596>
Einstein Toolkit <http://einsteintoolkit.org>
The Einstein Toolkit
#136: Don't rebuild external libraries so often
-------------------------+--------------------------------------------------
Reporter: eschnett | Owner:
Type: enhancement | Status: new
Priority: minor | Milestone:
Component: Cactus | Version:
Keywords: |
-------------------------+--------------------------------------------------
One way to keep the external libraries that have been built would be the
following. Create a dummy configuration "ext" where all external libraries
are built. When another configuration is built, it should be easy to
specify to look there for the external libraries, or maybe this should
even be the default.
--
Ticket URL: <https://trac.einsteintoolkit.org/ticket/136>
Einstein Toolkit <http://einsteintoolkit.org>
The Einstein Toolkit
#554: GetComponents deletes local changes
------------------------+---------------------------------------------------
Reporter: eschnett | Owner: eschnett
Type: defect | Status: new
Priority: blocker | Milestone:
Component: SimFactory | Version:
Keywords: |
------------------------+---------------------------------------------------
After checking out an svn repository with GetComponents, I manually
switched to a different branch, and added local changes. GetComponents
--update then checked out the original branch and deleted all my local
changes.
--
Ticket URL: <https://trac.einsteintoolkit.org/ticket/554>
Einstein Toolkit <http://einsteintoolkit.org>
The Einstein Toolkit
#508: list-simulations displays job ID when it doesn't make any sense
------------------------+---------------------------------------------------
Reporter: hinder | Owner: eschnett
Type: defect | Status: new
Priority: minor | Milestone:
Component: SimFactory | Version:
Keywords: |
------------------------+---------------------------------------------------
The list-simulations command displays a restart number and job ID even for
simulations for which there is no job in the queue. The attached patch
omits these in that case.
--
Ticket URL: <https://trac.einsteintoolkit.org/ticket/508>
Einstein Toolkit <http://einsteintoolkit.org>
The Einstein Toolkit
#222: Dubious code in Hydro_InitExcision.c
----------------------+-----------------------------------------------------
Reporter: eschnett | Owner:
Type: defect | Status: new
Priority: minor | Milestone:
Component: Cactus | Version:
Keywords: |
----------------------+-----------------------------------------------------
Hydro_InitExcision.c contains the following code:
if ( (hydro_initexcision_coordinate_length <= 0.0) &&
( ( x_frac > 0.5 - hydro_initexcision_fraction) &&
( x_frac < 0.5 + hydro_initexcision_fraction) &&
( y_frac > 0.5 - hydro_initexcision_fraction) &&
( y_frac < 0.5 + hydro_initexcision_fraction) &&
( z_frac > 0.5 - hydro_initexcision_fraction) &&
( z_frac < 0.5 + hydro_initexcision_fraction)
) ||
( (hydro_initexcision_coordinate_length > 0.0) &&
( fabs(x[point]-hydro_initexcision_position_x) <=
hydro_initexcision_coordinate_length*0.5) &&
( fabs(y[point]-hydro_initexcision_position_y) <=
hydro_initexcision_coordinate_length*0.5) &&
( fabs(z[point]-hydro_initexcision_position_z) <=
hydro_initexcision_coordinate_length*0.5)
)
)
This code has an "and" (&&) and an "or" (||) operation at top level. Is
this intended? The code would be clearer with an additional set of
parenthesis, or by introducing a suitable set of temporaries for sub-
expressions.
--
Ticket URL: <https://trac.einsteintoolkit.org/ticket/222>
Einstein Toolkit <http://einsteintoolkit.org>
The Einstein Toolkit