Trac December 2013

trac@lists.einsteintoolkit.org

1 participants
146 discussions

[Einstein Toolkit] #1152: Add option to compute center of mass to hydro_analysis and lots of smaller changes
by Einstein Toolkit 01 Dec '14

01 Dec '14

#1152: Add option to compute center of mass to hydro_analysis and lots of smaller changes -----------------------------------+---------------------------------------- Reporter: rhaas | Owner: Type: enhancement | Status: new Priority: minor | Milestone: Component: EinsteinToolkit thorn | Version: Keywords: Hydro_Analysis | -----------------------------------+---------------------------------------- The attached set of patches adds the possibility to compute a center of mass location to hydro_analysis. It works by computing the center of mass (via x[idx]*rho[idx]) of the matter in a region of radius Hydro_Analysis_r_core around the point of maximum density. Only points whose density is above a fraction Hydro_Analysis_rho_core_rel_min of the maximum density are considered. I also include a number of bugfix patches and patches to make Hydro_Analysis more controllable by user input rather than hard-coded values. All patches contain a short description in the patch (ie. the git commit message). The ones adding extra control and/or warnings are: * Hydro_Analysis: add verbosity_level option to control how much data to output to stdout * Hydro_Analysis: use Fortran modules for prototypes if available * Hydro_Analysis: add parameters to control which interpolator is used * Hydro_Analysis: make parameters steerable * Hydro_Analysis: warn if grid point with maximum value cannot be found on grid * Hydro_Analysis: add parameter Hydro_Analysis_comp_rho_max_every * Hydro_Analysis: add option rho_max_loc_use_rotatingsymmetry180 * Hydro_Analysis: add option to average the location of multiple identical maxima * Hydro_Analysis: fiddle with when to warn about multiple identical maxima Bugfixes are: * Hydro_Analysis: checkpoint grid scalars * Hydro_Analysis: do reduction in global mode New feature: * Hydro_Analysis: add routine to compute center of mass in core region -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1152> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 19

[Einstein Toolkit] #1006: ExternalLibraries' configure.sh scripts handle /usr inconistently
by Einstein Toolkit 26 Nov '14

26 Nov '14

#1006: ExternalLibraries' configure.sh scripts handle /usr inconistently -----------------------------------+---------------------------------------- Reporter: rhaas | Owner: Type: defect | Status: new Priority: minor | Milestone: Component: EinsteinToolkit thorn | Version: Keywords: ExternalLibraries | -----------------------------------+---------------------------------------- library path used for -L should not contain the system paths at least /lib, /lib64, /usr/lib, /usr/lib64, /usr/local/lib, /usr/local/lib64 (plus MacOS equivalents, and any other OS we support). -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1006> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 10

[Einstein Toolkit] #1338: Rename Carpet output files
by Einstein Toolkit 25 Nov '14

25 Nov '14

#1338: Rename Carpet output files ----------------------+----------------------------------------------------- Reporter: eschnett | Owner: eschnett Type: defect | Status: new Priority: major | Milestone: Component: Carpet | Version: Keywords: | ----------------------+----------------------------------------------------- Windows does not allow colons in file names. Output files produced by Carpet's should therefore not use colons. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1338> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 36

[Einstein Toolkit] #1490: ExternalLibraries/PAPI contains testsuite, but no data
by Einstein Toolkit 10 Nov '14

10 Nov '14

#1490: ExternalLibraries/PAPI contains testsuite, but no data -----------------------------------+---------------------------------------- Reporter: knarf | Owner: Type: defect | Status: new Priority: minor | Milestone: ET_2014_05 Component: EinsteinToolkit thorn | Version: development version Keywords: | -----------------------------------+---------------------------------------- ExternalLibraries/PAPI contains testsuite, but no data. This means the testsuite mechanism (currently) will count it always as succeeding, which is not helpful. Also, it contains a README file which only says that this directory is empty - which is not only not helpful, but also wrong, given that there is this README inside.. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1490> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 2

[Einstein Toolkit] #1481: Hidden hard-coded limits on max_l_modes and max_vars in Multipole
by Einstein Toolkit 10 Nov '14

10 Nov '14

#1481: Hidden hard-coded limits on max_l_modes and max_vars in Multipole --------------------------------------+------------------------------------- Reporter: bernard.j.kelly@… | Owner: Type: defect | Status: new Priority: major | Milestone: ET_2013_11 Component: EinsteinToolkit thorn | Version: ET_2013_05 Keywords: Multipole | --------------------------------------+------------------------------------- The EinsteinAnalysis/Multipole thorn has hard-coded limits (in src/multipole.cc) on the number of grid functions that can be decomposed (max_vars) and how high in polar quantum number this decomposition can go (max_l_modes). However, these are not reflected in the thorn's param.ccl. In fact, param.ccl contains a parameter "l_max", allowing it to be *any* positive value, and doesn't test this against max_l_modes until execution of this source. Wouldn't it make more sense to impose max_l_modes immediately at PARAMCHECK? To make the actual limit on interpolated functions explicit, a number of desired interpolants could be set in param.ccl (like "n_variables") --- limited if necessary to a hard-coded number that appears as a limit in the range. If the user tries to set n_variables too high, it gets caught at PARAMCHECK; if (s)he accidentally includes too many entries in the "variables" parameter, the extra ones would just be silently ignored. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1481> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 4

[Einstein Toolkit] #1360: TAT/TATPETSc has no (ET-only) testsuite
by Einstein Toolkit 10 Nov '14

10 Nov '14

#1360: TAT/TATPETSc has no (ET-only) testsuite -----------------------------------+---------------------------------------- Reporter: knarf | Owner: Type: enhancement | Status: new Priority: minor | Milestone: ET_2013_11 Component: EinsteinToolkit thorn | Version: development version Keywords: | -----------------------------------+---------------------------------------- It would be nice if TATPETSc, being part of the ET, would have at least one testsuite that can actually run using the ET only. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1360> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 3

[Einstein Toolkit] #1317: GRHydro should provide _one_ mechanism to set a GP to atmosphere
by Einstein Toolkit 10 Nov '14

10 Nov '14

#1317: GRHydro should provide _one_ mechanism to set a GP to atmosphere -----------------------------------+---------------------------------------- Reporter: knarf | Owner: Type: enhancement | Status: new Priority: minor | Milestone: Component: EinsteinToolkit thorn | Version: development version Keywords: | -----------------------------------+---------------------------------------- GRHydro should provide _one_ mechanism to set a GP to atmosphere which should then be used whenever that should be the case. Right now, this is copied in several places. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1317> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 4

[Einstein Toolkit] #1075: Test cases with specific number of processes
by Einstein Toolkit 20 Oct '14

20 Oct '14

#1075: Test cases with specific number of processes -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: Type: enhancement | Status: new Priority: major | Milestone: Component: Cactus | Version: Keywords: | -------------------------+-------------------------------------------------- Some test cases require a specific number of processes. Instead not running, they should run on that number of processes. This would ensure that all tests execute all the time. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1075> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 40

[Einstein Toolkit] #1158: ExternalLibraries/HDF5 should change the defaults for HDF5_ENABLE_CXX and HDF5_ENABLE_FORTRAN to "no".
by Einstein Toolkit 13 Oct '14

13 Oct '14

#1158: ExternalLibraries/HDF5 should change the defaults for HDF5_ENABLE_CXX and HDF5_ENABLE_FORTRAN to "no". -----------------------------------+---------------------------------------- Reporter: knarf | Owner: Type: defect | Status: new Priority: minor | Milestone: Component: EinsteinToolkit thorn | Version: development version Keywords: | -----------------------------------+---------------------------------------- ExternalLibraries/HDF5 should change the defaults for HDF5_ENABLE_CXX and HDF5_ENABLE_FORTRAN to "no". Nothing within the toolkit or Cactus still uses these interfaces and system wide installed libraries might not come with it, leading to link failures. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1158> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 30

[Einstein Toolkit] #1388: New thorn MemSpeed
by Einstein Toolkit 02 Oct '14

02 Oct '14

#1388: New thorn MemSpeed -----------------------------------+---------------------------------------- Reporter: eschnett | Owner: Type: enhancement | Status: new Priority: major | Milestone: Component: EinsteinToolkit thorn | Version: development version Keywords: | -----------------------------------+---------------------------------------- I have written a thorn MemSpeed, available at <https://svn.einsteintoolkit.org/incoming/MemSpeed>. This thorn is useful for performance tuning. I propose to add it to CactusUtils. From the README: Determine the speed of the CPU, as well as latencies and bandwidths of caches and main memory. These provides ideal, but real-world values against which the performance of other routines can be compared. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1388> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 7

← Newer
1
...
5
6
7
8
9
10
11
...
15
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Trac December 2013