Trac

trac@lists.einsteintoolkit.org

8708 discussions

#2604: Simbuilding problem on macOS Monterey
by shanshan rodriguez 23 Jun '22

23 Jun '22

#2604: Simbuilding problem on macOS Monterey Reporter: Lorenzo Bertassi Status: resolved Milestone: Version: ET_2021_11 Type: bug Priority: major Component: SimFactory Comment (by shanshan rodriguez): Thanks for your prompt reply, Roland. I did follow the tutorial prerequisite and have installed Xcode, Macports and homebrew successfully. But this doesn’t seem to fix the issue for me. Also, FYI I was able to build it successfully on a Big Sur Macbook. Could this be an issue related to Monterey? -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2604/simbuilding-probl…

1 0

#2604: Simbuilding problem on macOS Monterey
by Roland Haas 23 Jun '22

23 Jun '22

#2604: Simbuilding problem on macOS Monterey Reporter: Lorenzo Bertassi Status: resolved Milestone: Version: ET_2021_11 Type: bug Priority: major Component: SimFactory Comment (by Roland Haas): This is fixed in the instructions provided in the tutorial notebook. In a nutshell, `clang` is not $has never been$ supported.Instead one must install either macports or homebrew and use the actual `gcc` compiler in there. Please see this email: [http://lists.einsteintoolkit.org/pipermail/users/2022-March/008436.html](ht… -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2604/simbuilding-probl…

1 0

#2604: Simbuilding problem on macOS Monterey
by shanshan rodriguez 23 Jun '22

23 Jun '22

#2604: Simbuilding problem on macOS Monterey Reporter: Lorenzo Bertassi Status: resolved Milestone: Version: ET_2021_11 Type: bug Priority: major Component: SimFactory Comment (by shanshan rodriguez): Hello! I’m experiencing the same issue. I’m also using Mac Monterey and Xcode 13. The last few lines of my error message look identical as yours. If you could share how this was resolved, I’d really appreciate it! Thank you. -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2604/simbuilding-probl…

1 0

#2614: Link to SelfForce1D docs from ET page
by Roland Haas 20 Jun '22

20 Jun '22

#2614: Link to SelfForce1D docs from ET page Reporter: Roland Haas Status: resolved Milestone: ET_2022_11 Version: Type: enhancement Priority: major Component: EinsteinToolkit website Changes (by Roland Haas): status: resolved (was new) -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2614/link-to-selfforce…

1 0

#2614: Link to SelfForce1D docs from ET page
by Roland Haas 20 Jun '22

20 Jun '22

#2614: Link to SelfForce1D docs from ET page Reporter: Roland Haas Status: new Milestone: ET_2022_11 Version: Type: enhancement Priority: major Component: EinsteinToolkit website Comment (by Roland Haas): Applied as git hash [0167a24](https://bitbucket.org/einsteintoolkit/www/commits/0167a243fd05a49e… "documentation: add links to kuibit and SelfForce1D" of [www](https://bitbucket.org/einsteintoolkit/www) -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2614/link-to-selfforce…

1 0

#2481: documentation page on ET site points to outdated tutorial
by Roland Haas 20 Jun '22

20 Jun '22

#2481: documentation page on ET site points to outdated tutorial Reporter: Roland Haas Status: resolved Milestone: Version: Type: bug Priority: major Component: EinsteinToolkit website Changes (by Roland Haas): status: resolved (was new) -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2481/documentation-pag…

1 0

#2481: documentation page on ET site points to outdated tutorial
by Roland Haas 20 Jun '22

20 Jun '22

#2481: documentation page on ET site points to outdated tutorial Reporter: Roland Haas Status: new Milestone: Version: Type: bug Priority: major Component: EinsteinToolkit website Comment (by Roland Haas): Applied as git hash [247bebe](https://bitbucket.org/einsteintoolkit/www/commits/247bebeb961520e6… "papers: add Zilhao&Loeffler and Choustikov tutorials" of [www](https://bitbucket.org/einsteintoolkit/www) -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2481/documentation-pag…

1 0

#2601: Add four more parameters for carpet
by Liwei Ji 20 Jun '22

20 Jun '22

#2601: Add four more parameters for carpet Reporter: Liwei Ji Status: new Milestone: Version: development version Type: enhancement Priority: major Component: Carpet Comment (by Liwei Ji): Hi @{557058:59e031ba-9bb5-4298-a472-7b99d0ae6f22} , here is a test case ``` ActiveThorns = " Boundary Carpet CarpetIOASCII CarpetLib # CarpetRegrid2 CartGrid3D CoordBase IOUtil InitBase MoL SymBase " $ghost_size = 1 $boundary_size = 1 $num_levels = 1 IOASCII::out1D_vars = " grid::x " IO::out_dir = $parfile IO::out_fileinfo = "none" IO::parfile_write = no IOASCII::out1D_every = 1 IOASCII::out1D_d = no IOASCII::out1D_y = no IOASCII::out1D_z = no Carpet::max_refinement_levels = 1 Carpet::use_buffer_zones = yes Carpet::prolongation_order_space = 1 Carpet::prolongation_order_time = 1 Carpet::init_fill_timelevels = yes CartGrid3D::type = "CoordBase" CartGrid3D::domain = "full" CartGrid3D::avoid_origin = no CoordBase::xmin = -1. CoordBase::xmax = +1 - 0.125 CoordBase::ymin = -0.125 CoordBase::ymax = +0.125 CoordBase::zmin = -0.125 CoordBase::zmax = +0.125 CoordBase::dx = 0.125 CoordBase::dy = 0.125 CoordBase::dz = 0.125 driver::ghost_size = $ghost_size Cactus::cctk_itlast = 0 Carpet::domain_from_CoordBase = yes #Carpet::split_interior_points_x = yes Carpet::processor_topology = "manual" Carpet::processor_topology_3d_x = 4 Carpet::processor_topology_3d_y = 1 Carpet::processor_topology_3d_z = 1 CoordBase::boundary_size_x_lower = $boundary_size CoordBase::boundary_size_y_lower = $boundary_size CoordBase::boundary_size_z_lower = $boundary_size CoordBase::boundary_size_x_upper = $boundary_size CoordBase::boundary_size_y_upper = $boundary_size CoordBase::boundary_size_z_upper = $boundary_size CoordBase::boundary_shiftout_x_lower = 1 CoordBase::boundary_shiftout_x_upper = 1 #CoordBase::boundary_shiftout_y_lower = 1 #CoordBase::boundary_shiftout_y_upper = 1 #CoordBase::boundary_shiftout_z_lower = 1 #CoordBase::boundary_shiftout_z_upper = 1 #CarpetRegrid2::regrid_every = 0 #CarpetRegrid2::verbose = yes #CarpetRegrid2::num_centres = 1 #CarpetRegrid2::num_levels_1 = $num_levels #CarpetRegrid2::position_x_1 = 0.0 #CarpetRegrid2::radius_1[1] = 0.2 ``` I made the following changes: 1. remove `CarpetRegrid2`, it seems that the new pars are not consistent with it, 2. set `Carpet::max_refinement_levels = 1` the new pars only can work with no refinement case for now, 3. add `CoordBase::boundary_shiftout_x_lower = 1` and `CoordBase::boundary_shiftout_x_upper = 1`, for some reason only when I turn on these. The boundary ghost points are counted as global points. And these option are on in `SphericalNR`. After these changes, when `Carpet::split_interior_points_x = yes`, I got ``` ipos = [0,0,0], nprocs_dir = [4,1,1], cub = [5,3,3], rub0 = [18,3,3] ipos = [1,0,0], nprocs_dir = [4,1,1], cub = [9,3,3], rub0 = [18,3,3] ipos = [2,0,0], nprocs_dir = [4,1,1], cub = [13,3,3], rub0 = [18,3,3] ipos = [3,0,0], nprocs_dir = [4,1,1], cub = [18,3,3], rub0 = [18,3,3] ``` when `Carpet::split_interior_points_x = no`, I got ``` ipos = [0,0,0], nprocs_dir = [4,1,1], cub = [5,3,3], rub0 = [18,3,3] ipos = [1,0,0], nprocs_dir = [4,1,1], cub = [10,3,3], rub0 = [18,3,3] ipos = [2,0,0], nprocs_dir = [4,1,1], cub = [14,3,3], rub0 = [18,3,3] ipos = [3,0,0], nprocs_dir = [4,1,1], cub = [18,3,3], rub0 = [18,3,3] ``` basally, the distribution of `(clb, cub)` change in `x` change from `[(0,5), (5,9), (9,13), (13,18)]` to `[(0,5), (5,10), (10,14), (14,18)]` -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2601/add-four-more-par…

1 0

#2601: Add four more parameters for carpet
by Roland Haas 18 Jun '22

18 Jun '22

#2601: Add four more parameters for carpet Reporter: Liwei Ji Status: new Milestone: Version: development version Type: enhancement Priority: major Component: Carpet Comment (by Roland Haas): So I have trouble coming up with a test parfile that passes. This one: ``` ActiveThorns = " Boundary Carpet CarpetIOASCII CarpetLib CarpetRegrid2 CartGrid3D CoordBase IOUtil InitBase MoL SymBase " $ghost_size = 1 $boundary_size = 1 $num_levels = 1 IOASCII::out1D_vars = " grid::x " IO::out_dir = $parfile IO::out_fileinfo = "none" IO::parfile_write = no IOASCII::out1D_every = 1 IOASCII::out1D_d = no IOASCII::out1D_y = no IOASCII::out1D_z = no Carpet::max_refinement_levels = 2 Carpet::use_buffer_zones = yes Carpet::prolongation_order_space = 1 Carpet::prolongation_order_time = 1 Carpet::init_fill_timelevels = yes CartGrid3D::type = "CoordBase" CartGrid3D::domain = "full" CartGrid3D::avoid_origin = no CoordBase::xmin = -1. CoordBase::xmax = +1 - 0.125 CoordBase::ymin = -0.125 CoordBase::ymax = +0.125 CoordBase::zmin = -0.125 CoordBase::zmax = +0.125 CoordBase::dx = 0.125 CoordBase::dy = 0.125 CoordBase::dz = 0.125 driver::ghost_size = $ghost_size Cactus::cctk_itlast = 0 Carpet::domain_from_CoordBase = yes Carpet::split_interior_points_x = yes Carpet::processor_topology = "manual" Carpet::processor_topology_3d_x = 4 Carpet::processor_topology_3d_y = 1 Carpet::processor_topology_3d_z = 1 CoordBase::boundary_size_x_lower = $boundary_size CoordBase::boundary_size_y_lower = $boundary_size CoordBase::boundary_size_z_lower = $boundary_size CoordBase::boundary_size_x_upper = $boundary_size CoordBase::boundary_size_y_upper = $boundary_size CoordBase::boundary_size_z_upper = $boundary_size CarpetRegrid2::regrid_every = 0 CarpetRegrid2::verbose = yes CarpetRegrid2::num_centres = 1 CarpetRegrid2::num_levels_1 = $num_levels CarpetRegrid2::position_x_1 = 0.0 CarpetRegrid2::radius_1[1] = 0.2 ``` fails with `assert` failures on cub $essentially$. Namely $adding some debug code$: ``` ipos [0,0,0] nprocs_dir [4,1,1] cub [9,6,6] rub0 [32,6,6] ipos [1,0,0] nprocs_dir [4,1,1] cub [17,6,6] rub0 [32,6,6] ipos [2,0,0] nprocs_dir [4,1,1] cub [23,6,6] rub0 [32,6,6] ipos [3,0,0] nprocs_dir [4,1,1] cub [30,6,6] rub0 [32,6,6] cactus_sim: /home/rhaas/postdoc/gr/cactus/ET_trunk/arrangements/Carpet/Carpet/src/Recompose.cc:1246: void Carpet::SplitRegions_AsSpecified(const cGH*, std::vector<CarpetLib::region_t>&, std::vector<CarpetLib::region_t>&): Assertion `all(not(ipos == nprocs_dir - 1) or cub == rub0)' failed. ``` when run on the minimum number of MPI ranks $4$ that is supports. Could you provide a working parfile as a testcase? -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2601/add-four-more-par…

1 0

#2601: Add four more parameters for carpet
by Liwei Ji 16 Jun '22

16 Jun '22

#2601: Add four more parameters for carpet Reporter: Liwei Ji Status: new Milestone: Version: development version Type: enhancement Priority: major Component: Carpet Comment (by Liwei Ji): Hi @{557058:59e031ba-9bb5-4298-a472-7b99d0ae6f22} , I made some mistakes and ended up creating a new pull request [https://bitbucket.org/eschnett/carpet/pull-requests/51/carpet-add-par-to-sp… sorry for the troubles and huge delay. I think I have modify the pull request according to you suggestions. Could you please take a look? Thanks. -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2601/add-four-more-par…

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Trac