Trac June 2011

trac@lists.einsteintoolkit.org

2 participants
122 discussions

[Einstein Toolkit] #410: CarpetIOHDF5 may segfault when one_file_per_group is selected
by Einstein Toolkit 09 Nov '11

09 Nov '11

#410: CarpetIOHDF5 may segfault when one_file_per_group is selected --------------------------------+------------------------------------------- Reporter: bmundim | Owner: eschnett Type: defect | Status: new Priority: major | Milestone: Component: Carpet | Version: Keywords: Carpet git version | --------------------------------+------------------------------------------- I was facing one of those cryptic MPI error messages on Ranger, where your job quits without any useful error message. It turns out that this parameter file had CarpetIOHDF5::one_file_per_group = "yes" CarpetIOHDF5::out2D_vars = " ADMBase::gxx" and CarpetIOHDF5 would try to loop over the group variables when just one of them was selected. As a result it has accessed memory address that it was not supposed to, consequently killing the job. I have attached the stack back trace. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/410> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 4

[Einstein Toolkit] #431: Update some external libraries
by Einstein Toolkit 09 Nov '11

09 Nov '11

#431: Update some external libraries -----------------------------------+---------------------------------------- Reporter: eschnett | Owner: Type: enhancement | Status: new Priority: minor | Milestone: Component: EinsteinToolkit thorn | Version: Keywords: | -----------------------------------+---------------------------------------- Several external libraries have new versions available: LAPACK PETSc curl git These are only minor updates. I suggest to apply them. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/431> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 7

[Einstein Toolkit] #136: Don't rebuild external libraries so often
by Einstein Toolkit 08 Nov '11

08 Nov '11

#136: Don't rebuild external libraries so often -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: Type: enhancement | Status: new Priority: minor | Milestone: Component: Cactus | Version: Keywords: | -------------------------+-------------------------------------------------- One way to keep the external libraries that have been built would be the following. Create a dummy configuration "ext" where all external libraries are built. When another configuration is built, it should be easy to specify to look there for the external libraries, or maybe this should even be the default. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/136> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 27

[Einstein Toolkit] #222: Dubious code in Hydro_InitExcision.c
by Einstein Toolkit 08 Nov '11

08 Nov '11

#222: Dubious code in Hydro_InitExcision.c ----------------------+----------------------------------------------------- Reporter: eschnett | Owner: Type: defect | Status: new Priority: minor | Milestone: Component: Cactus | Version: Keywords: | ----------------------+----------------------------------------------------- Hydro_InitExcision.c contains the following code: if ( (hydro_initexcision_coordinate_length <= 0.0) && ( ( x_frac > 0.5 - hydro_initexcision_fraction) && ( x_frac < 0.5 + hydro_initexcision_fraction) && ( y_frac > 0.5 - hydro_initexcision_fraction) && ( y_frac < 0.5 + hydro_initexcision_fraction) && ( z_frac > 0.5 - hydro_initexcision_fraction) && ( z_frac < 0.5 + hydro_initexcision_fraction) ) || ( (hydro_initexcision_coordinate_length > 0.0) && ( fabs(x[point]-hydro_initexcision_position_x) <= hydro_initexcision_coordinate_length*0.5) && ( fabs(y[point]-hydro_initexcision_position_y) <= hydro_initexcision_coordinate_length*0.5) && ( fabs(z[point]-hydro_initexcision_position_z) <= hydro_initexcision_coordinate_length*0.5) ) ) This code has an "and" (&&) and an "or" (||) operation at top level. Is this intended? The code would be clearer with an additional set of parenthesis, or by introducing a suitable set of temporaries for sub- expressions. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/222> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 9

[Einstein Toolkit] #235: Improve performance of Fortran index calculations
by Einstein Toolkit 27 Oct '11

27 Oct '11

#235: Improve performance of Fortran index calculations -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: Type: enhancement | Status: new Priority: minor | Milestone: Component: Cactus | Version: Keywords: | -------------------------+-------------------------------------------------- In Fortran, Cactus currently declares grid functions e.g. as (this is the expansion of DECLARE_CCTK_ARGUMENTS) REAL*8 gxx (X0metric,X1metric,X2metric) where X0metric etc. are integers passed into the routine. Each grid function group has its own, independent size. This has two disadvantages: 1. The compiler does not know that all grid functions have the same size (namely cctk_lsh), and thus has to perform array index calculations separately for each group 2. The argument list is longer than neded The enclosed patch declares grid functions via cctk_lsh. Grid arrays are still declared independently. This reduces the code size of e.g. GRHydro/GRHydro_Tmunu.F90 from 6836 to 6241 bytes on my system. I have not attempted to measure a performance difference. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/235> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 6

[Einstein Toolkit] #458: Improve bboxset efficiency (e.g. for regridding)
by Einstein Toolkit 27 Oct '11

27 Oct '11

#458: Improve bboxset efficiency (e.g. for regridding) -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: eschnett Type: enhancement | Status: new Priority: major | Milestone: Component: Carpet | Version: Keywords: | -------------------------+-------------------------------------------------- The attached patch modifies the algorithm used to insert a new bbox into an existing bboxset. It reduces the computational complexity of this operation from O(n^2) to O(n), where n is the number of elements in the bboxset. This has the potential to speed up regridding significantly. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/458> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 4

[Einstein Toolkit] #329: SimFactory/ranger-intel11.cfg: Are BLAS and LAPACK compilations on Ranger optimized?
by Einstein Toolkit 27 Oct '11

27 Oct '11

#329: SimFactory/ranger-intel11.cfg: Are BLAS and LAPACK compilations on Ranger optimized? -------------------------+-------------------------------------------------- Reporter: bmundim | Owner: mthomas Type: enhancement | Status: new Priority: minor | Milestone: Component: SimFactory | Version: Keywords: | -------------------------+-------------------------------------------------- ranger-intel11.cfg now sets BLAS and LAPACK to be built along with the Cactus and other external libraries. Usually the host system BLAS and LAPACK are fine tuned to take advantage of the particular memory hierarchy of the host machine. I was wondering if this fine tuning is performed when we set BLAS = BUILD or LAPACK = BUILD, and, in case it is not, if it would be interesting to define Cactus env variables to set the size of the several cache memories for example and use it for this necessary fine tuning. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/329> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 5

[Einstein Toolkit] #271: python simfactory submit creates only the SubmitScript
by Einstein Toolkit 27 Oct '11

27 Oct '11

#271: python simfactory submit creates only the SubmitScript ----------------------------------------------+----------------------------- Reporter: alexander.beck-ratzka@… | Type: defect Status: new | Priority: major Milestone: | Component: Other Version: | Keywords: simfactory submit ----------------------------------------------+----------------------------- The python version of simfactory submit creates only the submitScript called PreparedSubmitScript. The RunScript is created at the moment of the simfactory run call at the end of the SubmitScript. So a user has no possibilty to check whether his settings e.g. for mpirun have been correct or not for all the time where the job is only queued. I feel this is not a user friendly solution. The RunScript should be created together with the SubmitScript. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/271> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 7

[Einstein Toolkit] #326: Update gsl path in Ranger option file to gsl 1.13
by Einstein Toolkit 27 Oct '11

27 Oct '11

#326: Update gsl path in Ranger option file to gsl 1.13 ---------------------------------------------+------------------------------ Reporter: bmundim | Owner: mthomas Type: task | Status: new Priority: minor | Milestone: Component: SimFactory | Version: Keywords: Ranger option configuration gsl | ---------------------------------------------+------------------------------ Ranger config file has been updated recently, so I thought to bring to your attention that gsl library on Ranger now defaults to version 1.13. Cheers, Bruno. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/326> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 7

[Einstein Toolkit] #327: Simfactory: ranger-intel11.run question.
by Einstein Toolkit 27 Oct '11

27 Oct '11

#327: Simfactory: ranger-intel11.run question. ------------------------+--------------------------------------------------- Reporter: bmundim | Owner: mthomas Type: defect | Status: new Priority: minor | Milestone: Component: SimFactory | Version: Keywords: | ------------------------+--------------------------------------------------- Shouldn't we load intel/11.1 there, since the default on Ranger is intel/10.1? Also unless "module load intel/11.1" is in your .login_user, it will fail to "module load mvapich" since no compiler has been selected. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/327> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 2

← Newer
1
2
3
4
5
6
7
8
9
...
13
Older →

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Trac June 2011