Trac September 2014

trac@lists.einsteintoolkit.org

1 participants
133 discussions

[Einstein Toolkit] #1276: Intel 2013.1.117 mis-compiles NewRad
by Einstein Toolkit 16 Mar '17

16 Mar '17

#1276: Intel 2013.1.117 mis-compiles NewRad -----------------------------------+---------------------------------------- Reporter: rhaas | Owner: Type: defect | Status: new Priority: minor | Milestone: Component: EinsteinToolkit thorn | Version: Keywords: NewRad | -----------------------------------+---------------------------------------- Intels compiler fails (with -O2) to push values for bmin onto the stack in lines 316 of newrad.cc and line 126 of extrap.cc. Adding printf's for bmin perturbs the bug out of existence, but adding a printf of the address of bmax and reveals that at the time extrap_kernel is call the integer just before this address is still the initialization value of bmin[2] and not the correct value. The attached patch disables optimization for the two driver functions affected (but not the actual kernel). The patch is specific (via an #if) for this particular compiler and version. What is the best way of handling this? Target any intel version starting from the known failing one until we know of known good one? Or starting from an older known good one (that would be intel 11 in my case). Hopefully no similar bug is triggered by Carpet's use of the same idiom. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1276> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 54

[Einstein Toolkit] #1439: SSL certificate check failing
by Einstein Toolkit 16 Mar '17

16 Mar '17

#1439: SSL certificate check failing --------------------+------------------------------------------------------- Reporter: rhaas | Owner: Type: defect | Status: new Priority: major | Milestone: Component: Other | Version: development version Keywords: | --------------------+------------------------------------------------------- The check for SSL certificates in line 535: {{{#perl # check for svn SSL problems if ( $rec{"TYPE"} eq "svn" && defined $rec{"AUTH_URL"} ) { my $base = $rec{"AUTH_URL"}; $base =~ s/(https\:\/\/[\w\.]+)\/(.*)$/$1/i; unless ( defined $svn_servers{$base} ) { my $ret = `$svn --non-interactive info $rec{AUTH_URL} 2>&1`; if ( $ret =~ /Server certificate verification failed/ ) { $svn_servers{$base} = 0; } else { $svn_servers{$base} = 1; } } } }}} is incorrect since eg for the ET manifest where {{{ AUTH_URL=https://svn.einsteintoolkit.org/$1/trunk }}} the executed svn command is: {{{ svn --non-interactive info https://svn.einsteintoolkit.org/$1/trunk 2>&1 }}} which actually returns and error: {{{ svn: E175002: Unable to connect to a repository at URL 'https://svn.einsteintoolkit.org/trunk' svn: E175002: The OPTIONS request returned invalid XML in the response: XML parse error at line 1: Extra content at the end of the document (https://svn.einsteintoolkit.org/trunk) }}} but the code does not test for svn failures at all at this point. The simplest fix would be to move the check further down where {{{$1}}} has been replaced by an actual value, eg into the loop: {{{ # we are splitting each group of components into individuals # to check for existence. they will now be passed individually to # the checkout/update subroutines. this will take up more memory, # but it should make it easier if the user decides to add another # component from the same repository later my @checkouts = split( /\s+/m, $rec{"CHECKOUT"} ); foreach my $checkout (@checkouts) { }}} in line 565 which however causes the test to run for every single CHECKOUT item. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1439> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 5

[Einstein Toolkit] #394: Testsuite log file should contain more information
by Einstein Toolkit 12 Dec '16

12 Dec '16

#394: Testsuite log file should contain more information -------------------------+-------------------------------------------------- Reporter: hinder | Owner: Type: enhancement | Status: new Priority: minor | Milestone: Component: Cactus | Version: Keywords: testsuites | -------------------------+-------------------------------------------------- It is useful to look at the testsuite log file for information about how the tests were run. For example, which compiler was used, and with what compiler options. We need to balance this against providing information which will always change, making diffs hard to read. The most extreme case would be to output all make variables. Maybe better would be to output CC, CFLAGS, CXX, etc. Another option would be to parse these and say "intel compiler", "gcc", "pgi" etc. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/394> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 2

[Einstein Toolkit] #1656: CarpetInterp and MoL do not work properly together
by Einstein Toolkit 02 Nov '16

02 Nov '16

#1656: CarpetInterp and MoL do not work properly together --------------------+------------------------------------------------------- Reporter: hinder | Owner: eschnett Type: defect | Status: new Priority: major | Milestone: Component: Carpet | Version: development version Keywords: | --------------------+------------------------------------------------------- I am trying to integrate interpolated quantities using MoL. I call the interpolator in MoL_CalcRHS, and want it to perform only a spatial interpolation of the current content of timelevel 0. This current content is what has been set by MoL; it is not the final value that will be at t_{n+1} or was at t_N, but is the intermediate value that should be used when computing the RHS at a given MoL substep. Since MoL does not set the Carpet time hierarchy values, CarpetInterp seems to get confused about how to do the interpolation. I need to tell CarpetInterp not to interpolate in time at all, but to use timelevel 0 only. Unfortunately, setting the interpolator option to use only one timelevel does not work. There is commented-out code to "use cctk_time to decide whether to interpolate", which essentially guarantees that no time interpolation will happen (since the interpolation is requested for cctk_time, and the current time is cctk_time, so they are always equal). Re-enabling this code allowed me to achieve 4th order convergence for integrated interpolated quantities, though I am not sure I understand everything that is going on in CarpetInterp. I have added a parameter which controls this, and with this parameter set to the default, nothing changes (i.e. it is not going to change anyone's results unless they set the parameter). I would like to commit this, so that collaborators can work off the same version. Since the patch is very small, I hope this will not add too much unneeded complexity. Is it OK to commit? Patch is attached. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1656> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 7

[Einstein Toolkit] #1622: Cannot log in to Blue Waters
by Einstein Toolkit 06 Oct '16

06 Oct '16

#1622: Cannot log in to Blue Waters ------------------------+--------------------------------------------------- Reporter: eschnett | Owner: eschnett Type: defect | Status: new Priority: major | Milestone: Component: SimFactory | Version: development version Keywords: | ------------------------+--------------------------------------------------- With the new gsissh mechanism in Simfactory, I receive the error below when I try to log in. {{{ $ ./bin/sim --verbose login bluewaters Info: Simfactory command: ./bin/../simfactory/lib/sim.py "--verbose" "login" "bluewaters" Info: Version 2356M Info: The Simulation Factory: Manage Cactus simulations Info: defs: /Users/eschnett/Cvanilla/simfactory/etc/defs.ini Info: defs.local: /Users/eschnett/Cvanilla/simfactory/etc/defs.local.ini Info: Executing command: login Info: Logging into remote machine bluewaters Info: executing command: /bin/bash -c '{ :; } && { { mkdir -p /Users/eschnett/Cvanilla/.globus && : >> /Users/eschnett/Cvanilla/.globus/proxy-tfca-ncsa && chmod go-rwx /Users/eschnett/Cvanilla/.globus/proxy-tfca-ncsa && export X509_USER_PROXY=/Users/eschnett/Cvanilla/.globus/proxy-tfca-ncsa && : mkdir -p /Users/eschnett/Cvanilla/.globus/certificates-tfca-ncsa && : export X509_CERT_DIR=/Users/eschnett/Cvanilla/.globus/certificates-tfca- ncsa && { { grid-proxy-info -issuer -file /Users/eschnett/Cvanilla/.globus/proxy-tfca- ncsa 2>/dev/null | grep "^/C=US/O=National Center for Supercomputing Applications/" >/dev/null 2>&1 && test $(grid-proxy-info -timeleft -file /Users/eschnett/Cvanilla/.globus /proxy-tfca-ncsa 2>/dev/null) -gt 0 2>/dev/null } || { { grid-proxy-destroy 2>/dev/null || true; } && myproxy-logon -p 7512 -s tfca.ncsa.illinois.edu -T -l eschnett -o /Users/eschnett/Cvanilla/.globus/proxy-tfca-ncsa } } && { globus-update-certificate-dir >/dev/null 2>&1 || true; }; } && gsissh -o UserKnownHostsFile=/Users/eschnett/Cvanilla/simfactory/etc/ssh_known_hosts -t eschnett(a)h2ologin.ncsa.illinois.edu '\''cd /u/sciteam/eschnett/Cvanilla || echo "Could not change to directory /u/sciteam/eschnett/Cvanilla"; $SHELL -l'\''; }' Enter MyProxy pass phrase: Failed to receive credentials. Failed writing buffer to BIO Failed unpacking proxy certificate from buffer Error accepting delegated credentials: Failed writing buffer to BIO Failed unpacking proxy certificate from buffer Error while executing command "/bin/bash -c '{ :; } && { { mkdir -p /Users/eschnett/Cvanilla/.globus && : >> /Users/eschnett/Cvanilla/.globus/proxy-tfca-ncsa && chmod go-rwx /Users/eschnett/Cvanilla/.globus/proxy-tfca-ncsa && export X509_USER_PROXY=/Users/eschnett/Cvanilla/.globus/proxy-tfca-ncsa && : mkdir -p /Users/eschnett/Cvanilla/.globus/certificates-tfca-ncsa && : export X509_CERT_DIR=/Users/eschnett/Cvanilla/.globus/certificates-tfca- ncsa && { { grid-proxy-info -issuer -file /Users/eschnett/Cvanilla/.globus/proxy-tfca- ncsa 2>/dev/null | grep "^/C=US/O=National Center for Supercomputing Applications/" >/dev/null 2>&1 && test $(grid-proxy-info -timeleft -file /Users/eschnett/Cvanilla/.globus /proxy-tfca-ncsa 2>/dev/null) -gt 0 2>/dev/null } || { { grid-proxy-destroy 2>/dev/null || true; } && myproxy-logon -p 7512 -s tfca.ncsa.illinois.edu -T -l eschnett -o /Users/eschnett/Cvanilla/.globus/proxy-tfca-ncsa } } && { globus-update-certificate-dir >/dev/null 2>&1 || true; }; } && gsissh -o UserKnownHostsFile=/Users/eschnett/Cvanilla/simfactory/etc/ssh_known_hosts -t eschnett(a)h2ologin.ncsa.illinois.edu '\''cd /u/sciteam/eschnett/Cvanilla || echo "Could not change to directory /u/sciteam/eschnett/Cvanilla"; $SHELL -l'\''; }'": Command returned exit status 1 eschnett@Redshift:~/Cvanilla (16:40:03) $ ./bin/sim login bluewaters Enter MyProxy pass phrase: Failed to receive credentials. Failed writing buffer to BIO Failed unpacking proxy certificate from buffer Error accepting delegated credentials: Failed writing buffer to BIO Failed unpacking proxy certificate from buffer }}} -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1622> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #1657: ExternalThorns/pciutils ignores most option list options
by Einstein Toolkit 28 Jun '16

28 Jun '16

#1657: ExternalThorns/pciutils ignores most option list options -----------------------------------+---------------------------------------- Reporter: rhaas | Owner: Type: defect | Status: new Priority: major | Milestone: Component: EinsteinToolkit thorn | Version: development version Keywords: pciutils | -----------------------------------+---------------------------------------- It does not contain a configure script and its Makefile hard-codes the compiler and linker to be gcc. This is an issue if LDFLAGS (or CFLAGS possibly) contain {{{-openmp}}} like they do when using the intel compiler. Also using mkl could (should) be done with the {{{-mkl}}} switch to the intel compiler but gcc (as used in pciutils) will naturally not accept this. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1657> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 4

[Einstein Toolkit] #1623: using ENV in parfiles is not documented
by Einstein Toolkit 25 Jun '16

25 Jun '16

#1623: using ENV in parfiles is not documented ---------------------------+------------------------------------------------ Reporter: rhaas | Owner: Type: defect | Status: new Priority: minor | Milestone: Component: Cactus | Version: development version Keywords: documentation | ---------------------------+------------------------------------------------ the user guide does not explain how to use ENV in parfiles (at least grep ENV doc/UsersGuide/*.tex does not find anything) nor do the peg files in src/piraha/peg contain. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/1623> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #382: SimFactory home directory on Kraken is too specific
by Einstein Toolkit 01 Jun '16

01 Jun '16

#382: SimFactory home directory on Kraken is too specific ------------------------+--------------------------------------------------- Reporter: hinder | Owner: mthomas Type: defect | Status: new Priority: major | Milestone: ET_2011_05 Component: SimFactory | Version: Keywords: | ------------------------+--------------------------------------------------- The mdb entry for Kraken in SimFactory has 'sourcebasedir' => '/nics/b/home/@USER@', My home directory is '/nics/d/home/@USER@' Either we could leave the source base dir as unset to force the user to set it, or we could automatically detect the location of the user's home directory (better). -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/382> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 19

[Einstein Toolkit] #960: Dissipation thorn schedules LOCAL routines after GLOBAL ones
by Einstein Toolkit 27 May '16

27 May '16

#960: Dissipation thorn schedules LOCAL routines after GLOBAL ones ----------------------------------------------+----------------------------- Reporter: rhaas | Owner: Type: defect | Status: new Priority: minor | Milestone: Component: EinsteinToolkit thorn | Version: Keywords: Dissipation and SphericalSurface | ----------------------------------------------+----------------------------- Dissipation currently contains a schedule item {{{ SCHEDULE setup_epsdis AT cctk_poststep after SphericalSurface_HasBeenSet { LANG: C SYNC: epsdisA_group } "Setup spatially varying dissipation" }}} However SphericalSurface_HasBeenSet is AFTER SphericalSurface_Set which is a GLOBAL routine. Since GLOBAL routines run last in POSTSTEP (which is in EVOL) the AFTER modifier is ignored for all but the last (finest) refinement level. This can lead to the wrong surface shape to be used by the local routines. It might actually make sense to teach the flesh about GLOBAL/LOCAL etc and refuse AFTER/BEFORE statements that span different modes. This of course depends on how much work this is and if we expect the dependency and task based scheduler to be finished soon and if there are legitimate uses for AFTER/BEFORE to span modes. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/960> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 9

[Einstein Toolkit] #912: Use CACTUS_CONFIGS_DIR in Formaline
by Einstein Toolkit 23 May '16

23 May '16

#912: Use CACTUS_CONFIGS_DIR in Formaline -----------------------------------+---------------------------------------- Reporter: eschnett | Owner: Type: defect | Status: new Priority: minor | Milestone: Component: EinsteinToolkit thorn | Version: Keywords: | -----------------------------------+---------------------------------------- Formaline assumes that configurations are stored in a "configs" subdirectory of $CCTK_HOME. Use $CACTUS_CONFIGS_DIR instead. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/912> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 9

← Newer
1
2
3
4
5
6
7
8
...
14
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Trac September 2014