Trac

trac@lists.einsteintoolkit.org

8708 discussions

#2413: Include "POWER" code to extrapolate waveforms to scri+ into ET
by Roland Haas 06 May '21

06 May '21

#2413: Include "POWER" code to extrapolate waveforms to scri+ into ET Reporter: Roland Haas Status: open Milestone: Version: Type: task Priority: major Component: EinsteinToolkit thorn Comment (by Roland Haas): Right now using `FROM_TWOPUNCTURES` serves the purpose that is being suggested for `f0 = None` \(`FROM_TWOPUNCTURES` is just a string and I only use the variable name to try and avoid typos as much as possible given that Python is fully dynamically typed and requires no variable declarations at all\). I would rather not use `None` for this since there is only one `None` and one can get the total mass also in other ways which is easy to do by having another `FROM_XXX` but not if `None` is already taken. You can use `power.py` as a Python module `import power` then call the Python functions directly. This means you have to write Python code rather than shell code. I have code around somewhere that would parse the header and then picks the correct column. That should be easy to incorporate. My first guesses for bad POWER output would be: * make sure your psi4 starts and ends at 0 amplitude * make you may have to change the list of detectors being used, using detectors too far out or in can give bad results * TODO: probably there should be options to control the order of the polynomials that are being fit to the data ‌ -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2413/include-power-cod…

1 0

#2413: Include "POWER" code to extrapolate waveforms to scri+ into ET
by Roland Haas 06 May '21

06 May '21

#2413: Include "POWER" code to extrapolate waveforms to scri+ into ET Reporter: Roland Haas Status: open Milestone: Version: Type: task Priority: major Component: EinsteinToolkit thorn Comment (by Roland Haas): Maria, Miguel since you are the first non-local users, which options would you find useful on the command line? Clearly setting `f0` seems among that list. Any others? -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2413/include-power-cod…

1 0

#2413: Include "POWER" code to extrapolate waveforms to scri+ into ET
by Gabriele Bozzola 06 May '21

06 May '21

#2413: Include "POWER" code to extrapolate waveforms to scri+ into ET Reporter: Roland Haas Status: open Milestone: Version: Type: task Priority: major Component: EinsteinToolkit thorn Comment (by Gabriele Bozzola): What I had in mind is that one can put `power.py` in their PATH and use it for all their simulations without having to touch the code. This requires the parameters to be adjustable via command-line. But if that is not the designed way of using the tool, that would be fine. Also, for clarity, instead of defining a string `FROM_TWOPUNCTURES` that is going to be compared to something that is morally a float \(`f0` and `ADMMass`\), I would recommend setting the default of two parameters to `None` in the function definitions, and then checking if value is `None`. If not, one can assume that the values from TwoPunctures are used \(which is what is happening now\). So, something along the lines of ```python if f0 is None: f0 = getCutoffFrequencyFromTwoPuncturesBBH(meta_name) ``` \(As someone that is not familiar with the code, I found the `FROM_TWOPUNCTURES` variable very confusing, but maybe its role will be clarified by the documentation.\) Two additional comments are: * When the spin is computed from QLM a specific column is read. In my simulation, column 59 corresponds to `59:qlm_coordspinx[1]`, which is not the mass. Some assumptions are being made here and no checks are performed. This might lead to subtly wrong results. * It would be nice, and probably easy, to extend POWER to be able to compute the strain at a fixed radius \(essentially, only doing the FFI\). My use case is this. I tried POWER on my data and the output doesn’t look good at all. I don’t know if the problem is the interpolation to infinity or the data. Maybe the data becomes unreliable at a specific distance. If I can plot the strains at all the various distances I can get a sense of what is going on. ‌ -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2413/include-power-cod…

1 0

#2413: Include "POWER" code to extrapolate waveforms to scri+ into ET
by Roland Haas 06 May '21

06 May '21

#2413: Include "POWER" code to extrapolate waveforms to scri+ into ET Reporter: Roland Haas Status: open Milestone: Version: Type: task Priority: major Component: EinsteinToolkit thorn Comment (by Roland Haas): I will have to write proper documentation still., which will document these, I am be quite reluctant to add new options to the command line since it can easily become a mess. For more complex use cases, using it as a Python module and calling the POWER or Nakano routines directly is the preferred way of using it. The thinking is that “module options” will be things that would be identical between simulations while function arguments are things that change from one simulation to the next. -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2413/include-power-cod…

1 0

#2526: McLachlan has incorrect READ declarations for presync.
by Peter Diener 06 May '21

06 May '21

#2526: McLachlan has incorrect READ declarations for presync. Reporter: Peter Diener Status: new Milestone: ET_2021_05 Version: development version Type: bug Priority: major Component: EinsteinToolkit thorn The schedule.ccl file contains incorrect READ declarations for the stress-energy tensor from TmunuBase for the routines ML\_BSSN\_ADMBaseEverywhere and ML\_BSSN\_ADMBaseInterior. The Read statements were present \(but commented out\) after commit 13f855e8262ca38063a4d0fff827562208c8c86e and then uncommented after commit 25db4e50dec6fb64b352d3092e9d4abd40aa3002. If I’m not mistaken the schedule.cct is generated by Kranc, my suspicion is that they have been generated by Kranc for some time, commented out by hand until commit 13f855e8262ca38063a4d0fff827562208c8c86e and then not after that. -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2526/mclachlan-has-inc…

1 0

#2175: Test "Single, stable neutron star" example
by Peter Diener 06 May '21

06 May '21

#2175: Test "Single, stable neutron star" example Reporter: Roland Haas Status: open Milestone: ET_2021_05 Version: development version Type: task Priority: major Component: EinsteinToolkit website Comment (by Peter Diener): After a bit of investigation it appears that the schedule.ccl file for ML\_BSSN contains erroneous read declarations for the stress energy tensor from TmunuBase. Tmunu is not necessary for converting from BSSN to ADM variables. I believe this is generated by Kranc. I still tried to comment out these read declarations and rerun and found agreement to within roundoff errors with the gallery files. I will open a separate ticket for this issue. -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2175/test-single-stabl…

1 0

#2413: Include "POWER" code to extrapolate waveforms to scri+ into ET
by Gabriele Bozzola 05 May '21

05 May '21

#2413: Include "POWER" code to extrapolate waveforms to scri+ into ET Reporter: Roland Haas Status: open Milestone: Version: Type: task Priority: major Component: EinsteinToolkit thorn Comment (by Gabriele Bozzola): I also tried the new POWER. It took me a while to figure out how to set f0 and M\_ADM. I would have expected to find these options among the ones you can specify via command-line, or at least among the “module options”. I saw that there are checks like `f0 == FROM_TWOPUNCTURES`, so I even considered whether I had to set `f0` by setting the variable `FROM_TWOPUNCTURES`. -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2413/include-power-cod…

1 0

#2413: Include "POWER" code to extrapolate waveforms to scri+ into ET
by Maria 05 May '21

05 May '21

#2413: Include "POWER" code to extrapolate waveforms to scri+ into ET Reporter: Roland Haas Status: open Milestone: Version: Type: task Priority: major Component: EinsteinToolkit thorn Comment (by Maria): I tried to run power with nsnstohmns. It is able to read \*asc files, even defaults on them! Unfortunately, it still complains about missing TwoPunctures. ‌ ▶ ./power.py --radii '\[2:5\]' --method POWER nsnstohmns\_dx9 Extrapolating with POWER method... Traceback \(most recent call last\): File "./power.py", line 860, in <module> main\(\) File "./power.py", line 835, in main strains = POWER\(args.path, PSI4\_GLOB, radii, modes\) File "./power.py", line 481, in POWER meta\_name = glob.glob\(os.path.join\(simdirs, "TwoPunctures.bbh"\)\)\[0\] IndexError: list index out of range ‌ Regarding the path, it still requests a nested path for the files of type: ‘\*/output-????/\*/’ It would be good to be able to receive just the mp\_Psi4.h5. The error is either: It gives me either: FileNotFoundError: \[Errno 2\] No such file or directory or error: argument path: invalid dir\_path value ‌ Would be good to explain plain in the documentation about this. -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2413/include-power-cod…

1 0

#2525: ET website "capabilities" page only lists McLachlan but not lean_public or Baikal
by Roland Haas 29 Apr '21

29 Apr '21

#2525: ET website "capabilities" page only lists McLachlan but not lean_public or Baikal Reporter: Roland Haas Status: new Milestone: Version: development version Type: bug Priority: minor Component: EinsteinToolkit website -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2525/et-website-capabi…

1 0

#2175: Test "Single, stable neutron star" example
by Peter Diener 29 Apr '21

29 Apr '21

#2175: Test "Single, stable neutron star" example Reporter: Roland Haas Status: open Milestone: ET_2021_05 Version: development version Type: task Priority: major Component: EinsteinToolkit website Comment (by Peter Diener): I tried adding the presync\_mode parameter and got an almost immediate abort: WARNING level 0 from host DESKTOP-PLSCBCI.localdomain process 0 in thorn Carpet, file /mnt/e/diener/Cactus/configs/gallery/build/Carpet/PreSync.cc:260: -> Required read for TMUNUBASE::eTtt \(rl=0\) not satisfied. Have Nowhere and require Everywhere missing Everywhere at the start of routine ML\_BSSN::ML\_BSSN\_ADMBaseInterior. Current valid state: Valid entries: TMUNUBASE::eTtt \(rl=0\) Nowhere TMUNUBASE::eTtt \(rl=1\) Nowhere TMUNUBASE::eTtt \(rl=2\) Nowhere TMUNUBASE::eTtt \(rl=3\) Nowhere TMUNUBASE::eTtt \(rl=4\) Nowhere. cactus\_gallery: /mnt/e/diener/Cactus/configs/gallery/build/Carpet/helpers.cc:275: int Carpet::Abort\(const cGH\*, int\): Assertion \`0' failed. -- Ticket URL: https://bitbucket.org/einsteintoolkit/tickets/issues/2175/test-single-stabl…

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Trac