Trac

trac@lists.einsteintoolkit.org

8708 discussions

Re: [ET Trac] [Einstein Toolkit] #29: 'sim cd_output' command
by Einstein Toolkit 12 Jan '11

12 Jan '11

#29: 'sim cd_output' command --------------------------+------------------------------------------------- Reporter: knarf | Owner: mthomas Type: enhancement | Status: closed Priority: minor | Milestone: Component: SimFactory | Version: Resolution: fixed | Keywords: --------------------------+------------------------------------------------- Changes (by mthomas): * status: new => closed * resolution: => fixed Comment: I could not figure out a way to make simfactory automatically cd to a directory and have that change of a directory stick when simfactory exited. So I did what I could: There's a new command, {{{ sim get-output-dir <simulationname> [--restart-id=<id>] }}} It outputs something like the following: {{{ [mwt@eric2 simfactory]$ bin/sim get-output-dir refact_test DEBUG: Simfactory command: bin/../lib/sim.py "get-output-dir" "refact_test" DEBUG: Version exported The Simulation Factory: Manage Cactus simulations Info: defs: /work/mwt/cactus/Cactus/simfactory/etc/defs.ini Info: defs.local: /work/mwt/cactus/Cactus/simfactory/etc/defs.local.ini Executing command: get_output_dir Simulation name: refact_test Output directory: /work/mwt/simulations/refact_test/output-0003/qc0-mclachlan }}} From there, you can just copy and paste the output dir and go to it. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/29#comment:1> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 0

[Einstein Toolkit] #119: Have multiple dprints
by Einstein Toolkit 12 Jan '11

12 Jan '11

#119: Have multiple dprints -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: enhancement | Status: new Priority: minor | Milestone: Component: SimFactory | Version: Keywords: | -------------------------+-------------------------------------------------- If there are multiple versions of dprint specifying the intent ("I am going to abort with an error", "this is a severe problem", "warning", "log message"), then one could probably omit the second argument that specifies whether to print the error always. This would be a higher level interface and could make it easier to use. dabort derror dwarn dlog Internally, these would just call dprint, depending on the verbosity level and environment settings. For example, dabort would always print, and dwarn would not print if it happens during a non-essential operation. dlog would only print if the verbosity is high. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/119> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #197: Options for overriding mdb entries
by Einstein Toolkit 12 Jan '11

12 Jan '11

#197: Options for overriding mdb entries -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: enhancement | Status: new Priority: minor | Milestone: Component: SimFactory | Version: Keywords: | -------------------------+-------------------------------------------------- There are currently command line options to override certain mdb entries, e.g. "cpufreq" or "ppn". These options seem superfluous given the "mdbkey" option. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/197> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #198: "sim login" doesn't output ssh command line
by Einstein Toolkit 12 Jan '11

12 Jan '11

#198: "sim login" doesn't output ssh command line ------------------------+--------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: defect | Status: new Priority: minor | Milestone: Component: SimFactory | Version: Keywords: | ------------------------+--------------------------------------------------- "sim login" should output the ssh command line to help debugging. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/198> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #199: jobs.ini should be combined with properties.ini
by Einstein Toolkit 12 Jan '11

12 Jan '11

#199: jobs.ini should be combined with properties.ini -------------------------+-------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: enhancement | Status: new Priority: minor | Milestone: Component: SimFactory | Version: Keywords: | -------------------------+-------------------------------------------------- -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/199> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #173: --remote does not ask for Kraken passphrase
by Einstein Toolkit 12 Jan '11

12 Jan '11

#173: --remote does not ask for Kraken passphrase ------------------------+--------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: defect | Status: new Priority: major | Milestone: Component: SimFactory | Version: Keywords: | ------------------------+--------------------------------------------------- "sim sync kraken" and "sim login kraken" both as for the TG passphrase, but "sim --remote kraken ..." does not; instead, the command aborts with an error -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/173> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #170: "environcmd" option is ignored for "execute"
by Einstein Toolkit 12 Jan '11

12 Jan '11

#170: "environcmd" option is ignored for "execute" ------------------------+--------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: defect | Status: new Priority: major | Milestone: Component: SimFactory | Version: Keywords: | ------------------------+--------------------------------------------------- "sim execute" needs to take the mdb entry "environcmd" into account. All simfactory commands need to do that. This should happen globally when simfactory starts up, not by all simfactory commands individually. The "sshsetup" mdb entry should then be removed, because it offers the same functionality. "environcmd" should probably be renamed "envsetup". -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/170> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #160: Move log file from etc directory to log directory
by Einstein Toolkit 12 Jan '11

12 Jan '11

#160: Move log file from etc directory to log directory ----------------------+----------------------------------------------------- Reporter: eschnett | Owner: Type: defect | Status: new Priority: major | Milestone: Component: Other | Version: Keywords: | ----------------------+----------------------------------------------------- -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/160> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 2

[Einstein Toolkit] #194: Cannot submit remotely
by Einstein Toolkit 12 Jan '11

12 Jan '11

#194: Cannot submit remotely ------------------------+--------------------------------------------------- Reporter: eschnett | Owner: mthomas Type: defect | Status: new Priority: critical | Milestone: Component: SimFactory | Version: Keywords: | ------------------------+--------------------------------------------------- I issued the command $ ./bin/sim --remote numrel02 create-submit empty-i0000 --parfile=par/empty.par --procs=4 --walltime=1:0:0 which led to the local output: DEBUG: Simfactory command: ./bin/../simfactory/lib/sim.py "--remote" "numrel02" "create-submit" "empty-i0000" "--parfile=par/empty.par" "-- procs=4" "--walltime=1:0:0" DEBUG: Version 1109M The Simulation Factory: Manage Cactus simulations Info: defs: /Users/eschnett/EinsteinToolkit-hg/simfactory/etc/defs.ini Info: defs.local: /Users/eschnett/EinsteinToolkit- hg/simfactory/etc/defs.local.ini Managing for remote machine: numrel02 Warning: No xauth data; using fake authentication data for X11 forwarding. DEBUG: Simfactory command: /home/eschnett/EinsteinToolkit- hg/simfactory/bin/../lib/sim.py "create-submit" "empty-i0000" "-- parfile=par/empty.par" "--procs=4" "--walltime=1:0:0" DEBUG: Version exported The Simulation Factory: Manage Cactus simulations Info: defs: /home/eschnett/EinsteinToolkit-hg/simfactory/etc/defs.ini Info: defs.local: /home/eschnett/EinsteinToolkit- hg/simfactory/etc/defs.local.ini Warning: could not load from restart id 0001, /home/eschnett/simulations /empty-numrel02-2011.01.09-21.39.00/output-0001/SIMFACTORY/properties.ini does not exist, broken restart Executing command: create_submit Parameter file: /home/eschnett/EinsteinToolkit-hg/par/empty.par Configuration name not specified -- using default configuration "sim" Configuration name not specified -- using default configuration "sim" Skeleton Created Job directory: "/home/eschnett/simulations/empty-i0000" Executable: "/home/eschnett/EinsteinToolkit-hg/exe/cactus_sim" Option list: "/home/eschnett/simulations/empty-i0000/SIMFACTORY/cfg/OptionList" Submit script: "/home/eschnett/simulations/empty-i0000/SIMFACTORY/run/SubmitScript" Run script: "/home/eschnett/simulations/empty-i0000/SIMFACTORY/run/RunScript" Parameter file: "/home/eschnett/simulations/empty-i0000/SIMFACTORY/par/empty.par" Active Id: -1 Active restart id: -001 Assigned restart_id of: 0000 Found the following restart_ids: [] Maximum restart id determined to be: -001 Determined submit restart id: 0 DEBUG: Previous ini file: /home/eschnett/simulations/empty-i0000/output-- 001/SIMFACTORY/properties.ini DEBUG: for machine option "allocation", using default value "None" writing to internalDir: /home/eschnett/simulations/empty-i0000/output-0000/SIMFACTORY writing to: /home/eschnett/simulations/empty-i0000/output-0000/SIMFACTORY/SubmitScript Executing submit command: sh /home/eschnett/simulations/empty-i0000/output-0000/SIMFACTORY/SubmitScript < /dev/null > /dev/null 2> /dev/null & echo $! Submit finished, job id is 17469 The simulation is created on the remote machine, but its stdout says: $ cat *.out DEBUG: Simfactory command: /home/eschnett/EinsteinToolkit- hg/simfactory/bin/../lib/sim.py "run" "empty-i0000" "--machine=numrel02" "--restart-id=0" DEBUG: Version exported The Simulation Factory: Manage Cactus simulations Info: defs: /home/eschnett/EinsteinToolkit-hg/simfactory/etc/defs.ini Info: defs.local: /home/eschnett/EinsteinToolkit- hg/simfactory/etc/defs.local.ini Called from the wrong location. Current directory is '/mnt/sdc1/simulations/empty-i0000/output-0000' but expected a subdirectory of '/home/eschnett'. It is also be possible that you need to correct your 'sourcebasedir' entry in the mdb entry for this machine. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/194> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 1

[Einstein Toolkit] #150: TwoPunctures: output individual ADM masses even when tuning
by Einstein Toolkit 10 Jan '11

10 Jan '11

#150: TwoPunctures: output individual ADM masses even when tuning --------------------------------------+------------------------------------- Reporter: bernard.j.kelly@… | Type: enhancement Status: new | Priority: minor Milestone: ET_2011_06 | Component: EinsteinToolkit trac Version: ET_2010_11 | Keywords: --------------------------------------+------------------------------------- Can we output the individual puncture ADM mass post-solve in TwoPunctures? At present (Chandrasekhar stable release), they're only quoted if we're tuning the mass through iterative solves (which, I suppose, is what most people do). This requires only a handful of extra lines. I'm attaching an "svn diff" of my local version, which has this enabled. -- Ticket URL: <https://trac.einsteintoolkit.org/ticket/150> Einstein Toolkit <http://einsteintoolkit.org> The Einstein Toolkit

1 5

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Trac